fmcjesdadc1/a5gt: split xcvr cores

main
Rejeesh Kutty 2015-07-15 09:38:27 -04:00
parent 226e23ca1f
commit 2d8fa2024b
1 changed files with 250 additions and 0 deletions

View File

@ -0,0 +1,250 @@
// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// This may be done inside QSYS, but it does a bad job of connecting the same signal
// to multiple inputs, concatenation, bus splits and numerous connections
// in-between. Also signal tap doesn't behave nicely within the system.
`timescale 1ns/100ps
module sys_xcvr (
// io
up_clk,
up_rstn,
rx_ref_clk,
rx_d,
tx_ref_clk,
tx_d,
rst,
rx_clk,
rx_rstn,
rx_sysref,
rx_ip_sync,
rx_ip_sof,
rx_ip_data,
rx_ready,
rx_int,
tx_clk,
tx_rstn,
tx_sysref,
tx_ip_sync,
tx_ip_data,
tx_ready,
tx_int,
stp_clk,
stp_data,
stp_trigger);
// parameters are not used--
parameter PCORE_NUM_OF_TX_LANES = 4;
parameter PCORE_NUM_OF_RX_LANES = 4;
parameter PCORE_ST_DATA_WIDTH = 32;
parameter PCORE_ST_TRIGGER_WIDTH = 4;
// io
input up_clk;
input up_rstn;
input rx_ref_clk;
input [ 3:0] rx_d;
input tx_ref_clk;
output [ 3:0] tx_d;
input rst;
output rx_clk;
input rx_rstn;
input rx_sysref;
output rx_ip_sync;
output [ 3:0] rx_ip_sof;
output [127:0] rx_ip_data;
output [ 3:0] rx_ready;
output rx_int;
output tx_clk;
input tx_rstn;
input tx_sysref;
input tx_ip_sync;
input [127:0] tx_ip_data;
output [ 3:0] tx_ready;
output tx_int;
output stp_clk;
output [181:0] stp_data;
output [ 1:0] stp_trigger;
// internal signals
wire [ 3:0] rx_analogreset;
wire [ 3:0] rx_cal_busy;
wire rx_bit_reversal;
wire rx_byte_reversal;
wire [ 3:0] rx_lane_polarity;
wire [ 3:0] rx_lane_powerdown;
wire [ 3:0] rx_digitalreset;
wire [ 3:0] rx_islockedtodata;
wire [ 3:0] rx_patternalign_en;
wire rx_dev_lane_aligned;
wire [ 3:0] rx_pcfifo_empty;
wire [ 3:0] rx_pcfifo_full;
wire [ 3:0] rx_pcs_valid;
wire [ 15:0] rx_pcs_disperr;
wire [ 15:0] rx_pcs_errdetect;
wire [ 15:0] rx_pcs_kchar;
wire [127:0] rx_pcs_data;
// signal tap
assign stp_clk = rx_clk;
assign stp_data[181:181] = rx_sysref;
assign stp_data[180:180] = rx_ip_sync;
assign stp_data[179:176] = rx_pcs_valid;
assign stp_data[175:160] = rx_pcs_disperr;
assign stp_data[159:144] = rx_pcs_errdetect;
assign stp_data[143:128] = rx_pcs_kchar;
assign stp_data[127: 0] = rx_pcs_data;
assign stp_trigger[1] = rx_sysref;
assign stp_trigger[0] = rx_ip_sync;
// instantiations
sys_xcvr_rstcntrl_rx_pll i_rstcntrl_rx_pll (
.locked_export (),
.pll_rst_reset (rst),
.rst_reset (rst),
.rx_analogreset_rx_analogreset (rx_analogreset),
.rx_cal_busy_rx_cal_busy (rx_cal_busy),
.rx_clk_clk (rx_clk),
.rx_digitalreset_rx_digitalreset (rx_digitalreset),
.rx_is_lockedtodata_rx_is_lockedtodata (rx_islockedtodata),
.rx_ready_rx_ready (rx_ready),
.rx_ref_clk_clk (rx_ref_clk),
.up_clk_clk (up_clk));
sys_xcvr_core i_core (
.csr_bit_reversal (rx_bit_reversal),
.csr_byte_reversal (rx_byte_reversal),
.csr_lane_polarity (rx_lane_polarity),
.csr_lane_powerdown (rx_lane_powerdown),
.jesd204_rx_pcs_data (rx_pcs_data),
.jesd204_rx_pcs_data_valid (rx_pcs_valid),
.jesd204_rx_pcs_disperr (rx_pcs_disperr),
.jesd204_rx_pcs_errdetect (rx_pcs_errdetect),
.jesd204_rx_pcs_kchar_data (rx_pcs_kchar),
.patternalign_en (rx_patternalign_en),
.phy_csr_rx_pcfifo_empty (rx_pcfifo_empty),
.phy_csr_rx_pcfifo_full (rx_pcfifo_full),
.pll_ref_clk (rx_ref_clk),
.reconfig_from_xcvr (),
.reconfig_to_xcvr (280'd0),
.rx_analogreset (rx_analogreset),
.rx_cal_busy (rx_cal_busy),
.rx_digitalreset (rx_digitalreset),
.rx_islockedtodata (rx_islockedtodata),
.rx_serial_data (rx_d),
.rxlink_clk (rx_clk),
.rxlink_rst_n_reset_n (rx_rstn),
.rxphy_clk ());
sys_xcvr_rx_ip i_rx_ip (
.alldev_lane_aligned (rx_dev_lane_aligned),
.csr_bit_reversal (rx_bit_reversal),
.csr_byte_reversal (rx_byte_reversal),
.csr_cf (),
.csr_cs (),
.csr_f (),
.csr_hd (),
.csr_k (),
.csr_l (),
.csr_lane_polarity (rx_lane_polarity),
.csr_lane_powerdown (rx_lane_powerdown),
.csr_m (),
.csr_n (),
.csr_np (),
.csr_rx_testmode (),
.csr_s (),
.dev_lane_aligned (rx_dev_lane_aligned),
.dev_sync_n (rx_ip_sync),
.jesd204_rx_avs_chipselect (1'd0),
.jesd204_rx_avs_address (8'd0),
.jesd204_rx_avs_read (1'd0),
.jesd204_rx_avs_readdata (),
.jesd204_rx_avs_waitrequest (),
.jesd204_rx_avs_write (1'd0),
.jesd204_rx_avs_writedata (32'd0),
.jesd204_rx_avs_clk (up_clk),
.jesd204_rx_avs_rst_n (up_rstn),
.jesd204_rx_dlb_data (128'd0),
.jesd204_rx_dlb_data_valid (4'd0),
.jesd204_rx_dlb_disperr (16'd0),
.jesd204_rx_dlb_errdetect (16'd0),
.jesd204_rx_dlb_kchar_data (16'd0),
.jesd204_rx_frame_error (1'd0),
.jesd204_rx_int (rx_int),
.jesd204_rx_link_data (rx_ip_data),
.jesd204_rx_link_valid (),
.jesd204_rx_link_ready (1'd1),
.jesd204_rx_pcs_data (rx_pcs_data),
.jesd204_rx_pcs_data_valid (rx_pcs_valid),
.jesd204_rx_pcs_disperr (rx_pcs_disperr),
.jesd204_rx_pcs_errdetect (rx_pcs_errdetect),
.jesd204_rx_pcs_kchar_data (rx_pcs_kchar),
.patternalign_en (rx_patternalign_en),
.phy_csr_rx_pcfifo_empty (rx_pcfifo_empty),
.phy_csr_rx_pcfifo_full (rx_pcfifo_full),
.rx_cal_busy (rx_cal_busy),
.rx_islockedtodata (rx_islockedtodata),
.rxlink_clk (rx_clk),
.rxlink_rst_n_reset_n (rx_rstn),
.sof (rx_ip_sof),
.somf (),
.sysref (rx_sysref));
endmodule
// ***************************************************************************
// ***************************************************************************