pluto_hdl_adi/library/xilinx/axi_adxcvr/axi_adxcvr_up.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory
//      of this repository (LICENSE_GPL2), and also online at:
//      <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license, which can be found in the top level directory
//      of this repository (LICENSE_ADIBSD), and also on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************

`timescale 1ns/100ps

module axi_adxcvr_up #(

  // parameters

  parameter   integer ID = 0,
  parameter   integer NUM_OF_LANES = 8,
  parameter   integer XCVR_TYPE = 0,
  parameter   [ 7:0]  FPGA_TECHNOLOGY = 0,
  parameter   [ 7:0]  FPGA_FAMILY = 0,
  parameter   [ 7:0]  SPEED_GRADE = 0,
  parameter   [ 7:0]  DEV_PACKAGE = 0,
  parameter   [15:0]  FPGA_VOLTAGE = 0,
  parameter   integer TX_OR_RX_N = 0,
  parameter   integer QPLL_ENABLE = 1,
  parameter           LPM_OR_DFE_N = 1,
  parameter   [ 2:0]  RATE = 3'd0,
  parameter   [ 3:0]  TX_DIFFCTRL = 4'd8,
  parameter   [ 4:0]  TX_POSTCURSOR = 5'd0,
  parameter   [ 4:0]  TX_PRECURSOR = 5'd0,
  parameter   [ 1:0]  SYS_CLK_SEL = 2'd3,
  parameter   [ 2:0]  OUT_CLK_SEL = 3'd4) (

  // common

  output     [ 7:0]   up_cm_sel,
  output              up_cm_enb,
  output     [11:0]   up_cm_addr,
  output              up_cm_wr,
  output     [15:0]   up_cm_wdata,
  input      [15:0]   up_cm_rdata,
  input               up_cm_ready,

  // channel

  input               up_ch_pll_locked,
  output              up_ch_rst,
  output              up_ch_user_ready,
  input               up_ch_rst_done,
  output              up_ch_lpm_dfe_n,
  output     [ 2:0]   up_ch_rate,
  output     [ 1:0]   up_ch_sys_clk_sel,
  output     [ 2:0]   up_ch_out_clk_sel,
  output     [ 4:0]   up_ch_tx_diffctrl,
  output     [ 4:0]   up_ch_tx_postcursor,
  output     [ 4:0]   up_ch_tx_precursor,
  output     [ 7:0]   up_ch_sel,
  output              up_ch_enb,
  output     [11:0]   up_ch_addr,
  output              up_ch_wr,
  output     [15:0]   up_ch_wdata,
  input      [15:0]   up_ch_rdata,
  input               up_ch_ready,

  // eye-scan

  output     [ 7:0]   up_es_sel,
  output              up_es_req,
  output reg [15:0]   up_es_reset = 'h0,
  input               up_es_ack,
  output     [ 4:0]   up_es_pscale,
  output     [ 1:0]   up_es_vrange,
  output     [ 7:0]   up_es_vstep,
  output     [ 7:0]   up_es_vmax,
  output     [ 7:0]   up_es_vmin,
  output     [11:0]   up_es_hmax,
  output     [11:0]   up_es_hmin,
  output     [11:0]   up_es_hstep,
  output     [31:0]   up_es_saddr,
  input               up_es_status,

  // status

  output              up_status,
  output              up_pll_rst,

  // bus interface

  input               up_rstn,
  input               up_clk,
  input               up_wreq,
  input      [ 9:0]   up_waddr,
  input      [31:0]   up_wdata,
  output              up_wack,
  input               up_rreq,
  input      [ 9:0]   up_raddr,
  output     [31:0]   up_rdata,
  output              up_rack);

  // parameters

  localparam  [31:0]  VERSION = 32'h00110161;

  // internal registers

  reg             up_wreq_d = 'd0;
  reg     [31:0]  up_scratch = 'd0;
  reg             up_resetn = 'd0;
  reg     [ 3:0]  up_pll_rst_cnt = 'd0;
  reg     [ 3:0]  up_rst_cnt = 'd0;
  reg     [ 6:0]  up_user_ready_cnt = 'd0;
  reg             up_status_int = 'd0;
  reg             up_lpm_dfe_n = LPM_OR_DFE_N;
  reg     [ 2:0]  up_rate = RATE;
  reg     [ 1:0]  up_sys_clk_sel = SYS_CLK_SEL;
  reg     [ 2:0]  up_out_clk_sel = OUT_CLK_SEL;
  reg     [ 4:0]  up_tx_diffctrl = TX_DIFFCTRL;
  reg     [ 4:0]  up_tx_postcursor = TX_POSTCURSOR;
  reg     [ 4:0]  up_tx_precursor = TX_PRECURSOR;
  reg     [ 7:0]  up_icm_sel = 'd0;
  reg             up_icm_enb = 'd0;
  reg             up_icm_wr = 'd0;
  reg     [28:0]  up_icm_data = 'd0;
  reg     [15:0]  up_icm_rdata = 'd0;
  reg             up_icm_busy = 'd0;
  reg     [ 7:0]  up_ich_sel = 'd0;
  reg             up_ich_enb = 'd0;
  reg             up_ich_wr = 'd0;
  reg     [28:0]  up_ich_data = 'd0;
  reg     [15:0]  up_ich_rdata = 'd0;
  reg             up_ich_busy = 'd0;
  reg     [ 7:0]  up_ies_sel = 'd0;
  reg             up_ies_req = 'd0;
  reg     [ 4:0]  up_ies_prescale = 'd0;
  reg     [ 1:0]  up_ies_voffset_range = 'd0;
  reg     [ 7:0]  up_ies_voffset_step = 'd0;
  reg     [ 7:0]  up_ies_voffset_max = 'd0;
  reg     [ 7:0]  up_ies_voffset_min = 'd0;
  reg     [11:0]  up_ies_hoffset_max = 'd0;
  reg     [11:0]  up_ies_hoffset_min = 'd0;
  reg     [11:0]  up_ies_hoffset_step = 'd0;
  reg     [31:0]  up_ies_start_addr = 'd0;
  reg             up_ies_status = 'd0;
  reg             up_rreq_d = 'd0;
  reg     [31:0]  up_rdata_d = 'd0;

  // internal signals

  wire    [31:0]  up_rparam_s;

  // defaults

  assign up_wack = up_wreq_d;

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_wreq_d <= 'd0;
      up_scratch <= 'd0;
    end else begin
      up_wreq_d <= up_wreq;
      if ((up_wreq == 1'b1) && (up_waddr == 10'h002)) begin
        up_scratch <= up_wdata;
      end
    end
  end

  // reset-controller

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_resetn <= 'd0;
    end else begin
      if ((up_wreq == 1'b1) && (up_waddr == 10'h004)) begin
        up_resetn <= up_wdata[0];
      end
    end
  end

  assign up_pll_rst = up_pll_rst_cnt[3];
  assign up_ch_rst = up_rst_cnt[3];
  assign up_ch_user_ready = up_user_ready_cnt[6];
  assign up_status = up_status_int;

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_pll_rst_cnt <= 4'h8;
      up_rst_cnt <= 4'h8;
      up_user_ready_cnt <= 7'h00;
      up_status_int <= 1'b0;
    end else begin
      if (up_resetn == 1'b0) begin
        up_pll_rst_cnt <= 4'h8;
      end else if (up_pll_rst_cnt[3] == 1'b1) begin
        up_pll_rst_cnt <= up_pll_rst_cnt + 1'b1;
      end
      if ((up_resetn == 1'b0) || (up_pll_rst_cnt[3] == 1'b1) ||
        (up_ch_pll_locked == 1'b0)) begin
        up_rst_cnt <= 4'h8;
      end else if (up_rst_cnt[3] == 1'b1) begin
        up_rst_cnt <= up_rst_cnt + 1'b1;
      end
      if ((up_resetn == 1'b0) || (up_rst_cnt[3] == 1'b1)) begin
        up_user_ready_cnt <= 7'h00;
      end else if (up_user_ready_cnt[6] == 1'b0) begin
        up_user_ready_cnt <= up_user_ready_cnt + 1'b1;
      end
      if (up_resetn == 1'b0) begin
        up_status_int <= 1'b0;
      end else if (up_ch_rst_done == 1'b1) begin
        up_status_int <= 1'b1;
      end
    end
  end

  // control signals

  assign up_ch_lpm_dfe_n = up_lpm_dfe_n;
  assign up_ch_rate = up_rate;
  assign up_ch_sys_clk_sel = up_sys_clk_sel;
  assign up_ch_out_clk_sel = up_out_clk_sel;
  assign up_ch_tx_diffctrl = up_tx_diffctrl;
  assign up_ch_tx_postcursor = up_tx_postcursor;
  assign up_ch_tx_precursor = up_tx_precursor;

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_lpm_dfe_n <= LPM_OR_DFE_N;
      up_rate <= RATE;
      up_sys_clk_sel <= SYS_CLK_SEL;
      up_out_clk_sel <= OUT_CLK_SEL;
      up_tx_diffctrl <= TX_DIFFCTRL;
      up_tx_postcursor <= TX_POSTCURSOR;
      up_tx_precursor <= TX_PRECURSOR;
    end else begin
      if ((up_wreq == 1'b1) && (up_waddr == 10'h008)) begin
        up_lpm_dfe_n <= up_wdata[12];
        up_rate <= up_wdata[10:8];
        up_sys_clk_sel <= up_wdata[5:4];
        up_out_clk_sel <= up_wdata[2:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h030)) begin
        up_tx_diffctrl <= up_wdata[4:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h031)) begin
        up_tx_postcursor <= up_wdata[4:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h032)) begin
        up_tx_precursor <= up_wdata[4:0];
      end
    end
  end

  // common access

  assign up_cm_sel = up_icm_sel;
  assign up_cm_enb = up_icm_enb;
  assign up_cm_wr = up_icm_wr;
  assign up_cm_addr = up_icm_data[27:16];
  assign up_cm_wdata = up_icm_data[15:0];

  generate
  if (QPLL_ENABLE == 0) begin
  always @(posedge up_clk) begin
    up_icm_sel <= 'd0;
    up_icm_enb <= 'd0;
    up_icm_wr <= 'd0;
    up_icm_data <= 'd0;
    up_icm_rdata <= 'd0;
    up_icm_busy <= 'd0;
  end
  end else begin
  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_icm_sel <= 'd0;
      up_icm_enb <= 'd0;
      up_icm_wr <= 'd0;
      up_icm_data <= 'd0;
      up_icm_rdata <= 'd0;
      up_icm_busy <= 'd0;
    end else begin
      if ((up_wreq == 1'b1) && (up_waddr == 10'h010)) begin
        up_icm_sel <= up_wdata[7:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h011)) begin
        up_icm_enb <= 1'b1;
        up_icm_wr <= up_wdata[28];
      end else begin
        up_icm_enb <= 1'b0;
        up_icm_wr <= 1'b0;
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h011)) begin
        up_icm_data <= up_wdata[28:0];
      end
      if (up_cm_ready == 1'b1) begin
        up_icm_rdata <= up_cm_rdata;
        up_icm_busy <= 1'b0;
      end else if ((up_wreq == 1'b1) && (up_waddr == 10'h011)) begin
        up_icm_rdata <= 16'd0;
        up_icm_busy <= 1'b1;
      end
    end
  end
  end
  endgenerate

  // channel access

  assign up_ch_sel = up_ich_sel;
  assign up_ch_enb = up_ich_enb;
  assign up_ch_wr = up_ich_wr;
  assign up_ch_addr = up_ich_data[27:16];
  assign up_ch_wdata = up_ich_data[15:0];

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_ich_sel <= 'd0;
      up_ich_enb <= 'd0;
      up_ich_wr <= 'd0;
      up_ich_data <= 'd0;
      up_ich_rdata <= 'd0;
      up_ich_busy <= 'd0;
    end else begin
      if ((up_wreq == 1'b1) && (up_waddr == 10'h018)) begin
        up_ich_sel <= up_wdata[7:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h019)) begin
        up_ich_enb <= 1'b1;
        up_ich_wr <= up_wdata[28];
      end else begin
        up_ich_enb <= 1'b0;
        up_ich_wr <= 1'b0;
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h019)) begin
        up_ich_data <= up_wdata[28:0];
      end
      if (up_ch_ready == 1'b1) begin
        up_ich_rdata <= up_ch_rdata;
        up_ich_busy <= 1'b0;
      end else if ((up_wreq == 1'b1) && (up_waddr == 10'h019)) begin
        up_ich_rdata <= 16'd0;
        up_ich_busy <= 1'b1;
      end
    end
  end

  // eye-scan

  assign up_es_sel = up_ies_sel;
  assign up_es_req = up_ies_req;
  assign up_es_pscale = up_ies_prescale;
  assign up_es_vrange = up_ies_voffset_range;
  assign up_es_vstep = up_ies_voffset_step;
  assign up_es_vmax = up_ies_voffset_max;
  assign up_es_vmin = up_ies_voffset_min;
  assign up_es_hmax = up_ies_hoffset_max;
  assign up_es_hmin = up_ies_hoffset_min;
  assign up_es_hstep = up_ies_hoffset_step;
  assign up_es_saddr = up_ies_start_addr;

  generate
  if (TX_OR_RX_N == 1) begin
  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_ies_sel <= 'd0;
      up_ies_req <= 'd0;
      up_ies_prescale <= 'd0;
      up_ies_voffset_range <= 'd0;
      up_ies_voffset_step <= 'd0;
      up_ies_voffset_max <= 'd0;
      up_ies_voffset_min <= 'd0;
      up_ies_hoffset_max <= 'd0;
      up_ies_hoffset_min <= 'd0;
      up_ies_hoffset_step <= 'd0;
      up_ies_start_addr <= 'd0;
      up_ies_status <= 'd0;
      up_es_reset <= 'd0;
    end else begin
      up_ies_sel <= 'd0;
      up_ies_req <= 'd0;
      up_ies_prescale <= 'd0;
      up_ies_voffset_range <= 'd0;
      up_ies_voffset_step <= 'd0;
      up_ies_voffset_max <= 'd0;
      up_ies_voffset_min <= 'd0;
      up_ies_hoffset_max <= 'd0;
      up_ies_hoffset_min <= 'd0;
      up_ies_hoffset_step <= 'd0;
      up_ies_start_addr <= 'd0;
      up_ies_status <= 'd0;
      up_es_reset <= 'd0;
    end
  end
  end else begin
  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_ies_sel <= 'd0;
      up_ies_req <= 'd0;
      up_ies_prescale <= 'd0;
      up_ies_voffset_range <= 'd0;
      up_ies_voffset_step <= 'd0;
      up_ies_voffset_max <= 'd0;
      up_ies_voffset_min <= 'd0;
      up_ies_hoffset_max <= 'd0;
      up_ies_hoffset_min <= 'd0;
      up_ies_hoffset_step <= 'd0;
      up_ies_start_addr <= 'd0;
      up_ies_status <= 'd0;
      up_es_reset <= 'd0;
    end else begin
      if ((up_wreq == 1'b1) && (up_waddr == 10'h020)) begin
        up_ies_sel <= up_wdata[7:0];
      end
      if (up_es_ack == 1'b1) begin
        up_ies_req <= 1'b0;
      end else if ((up_wreq == 1'b1) && (up_waddr == 10'h028)) begin
        up_ies_req <= up_wdata[0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h029)) begin
        up_ies_prescale <= up_wdata[4:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h02a)) begin
        up_ies_voffset_range <= up_wdata[25:24];
        up_ies_voffset_step <= up_wdata[23:16];
        up_ies_voffset_max <= up_wdata[15:8];
        up_ies_voffset_min <= up_wdata[7:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h02b)) begin
        up_ies_hoffset_max <= up_wdata[27:16];
        up_ies_hoffset_min <= up_wdata[11:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h02c)) begin
        up_ies_hoffset_step <= up_wdata[11:0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h02d)) begin
        up_ies_start_addr <= up_wdata;
      end
      if (up_es_status == 1'b1) begin
        up_ies_status <= 1'b1;
      end else if ((up_wreq == 1'b1) && (up_waddr == 10'h02e)) begin
        up_ies_status <= up_ies_status & ~up_wdata[0];
      end
      if ((up_wreq == 1'b1) && (up_waddr == 10'h02f)) begin
        up_es_reset <= up_wdata[15:0];
      end
    end
  end
  end
  endgenerate

  // read interface

  assign up_rack = up_rreq_d;
  assign up_rdata = up_rdata_d;

  assign up_rparam_s[31:24] = 8'd0;

  // xilinx specific

  assign up_rparam_s[23:21] = 3'd0;
  assign up_rparam_s[20:20] = (QPLL_ENABLE == 0) ? 1'b0 : 1'b1;
  assign up_rparam_s[19:16] = XCVR_TYPE[3:0];

  // generic

  assign up_rparam_s[15: 9] = 7'd0;
  assign up_rparam_s[ 8: 8] = (TX_OR_RX_N == 0) ? 1'b0 : 1'b1;
  assign up_rparam_s[ 7: 0] = NUM_OF_LANES;

  always @(negedge up_rstn or posedge up_clk) begin
    if (up_rstn == 0) begin
      up_rreq_d <= 'd0;
      up_rdata_d <= 'd0;
    end else begin
      up_rreq_d <= up_rreq;
      if (up_rreq == 1'b1) begin
        case (up_raddr)
          10'h000: up_rdata_d <= VERSION;
          10'h001: up_rdata_d <= ID;
          10'h002: up_rdata_d <= up_scratch;
          10'h004: up_rdata_d <= {31'd0, up_resetn};
          10'h005: up_rdata_d <= {31'd0, up_status_int};
          10'h006: up_rdata_d <= {17'd0, up_user_ready_cnt, up_rst_cnt, up_pll_rst_cnt};
          10'h007: up_rdata_d <= {FPGA_TECHNOLOGY,FPGA_FAMILY,SPEED_GRADE,DEV_PACKAGE}; // [8,8,8,8]
          10'h008: up_rdata_d <= {19'd0, up_lpm_dfe_n, 1'd0, up_rate, 2'd0, up_sys_clk_sel, 1'd0, up_out_clk_sel};
          10'h009: up_rdata_d <= up_rparam_s;
          10'h010: up_rdata_d <= {24'd0, up_icm_sel};
          10'h011: up_rdata_d <= {3'd0, up_icm_data};
          10'h012: up_rdata_d <= {15'd0, up_icm_busy, up_icm_rdata};
          10'h018: up_rdata_d <= {24'd0, up_ich_sel};
          10'h019: up_rdata_d <= {3'd0, up_ich_data};
          10'h01a: up_rdata_d <= {15'd0, up_ich_busy, up_ich_rdata};
          10'h020: up_rdata_d <= {24'd0, up_ies_sel};
          10'h028: up_rdata_d <= {31'd0, up_ies_req};
          10'h029: up_rdata_d <= {27'd0, up_ies_prescale};
          10'h02a: up_rdata_d <= {6'd0, up_ies_voffset_range, up_ies_voffset_step, up_ies_voffset_max, up_ies_voffset_min};
          10'h02b: up_rdata_d <= {4'd0, up_ies_hoffset_max, 4'd0, up_ies_hoffset_min};
          10'h02c: up_rdata_d <= {20'd0, up_ies_hoffset_step};
          10'h02d: up_rdata_d <= up_ies_start_addr;
          10'h02e: up_rdata_d <= {31'd0, up_es_status};
          10'h02f: up_rdata_d <= {16'd0, up_es_reset};
          10'h030: up_rdata_d <= up_tx_diffctrl;
          10'h031: up_rdata_d <= up_tx_postcursor;
          10'h032: up_rdata_d <= up_tx_precursor;
	  10'h050: up_rdata_d <= {16'd0, FPGA_VOLTAGE};  // mV
          default: up_rdata_d <= 32'd0;
        endcase
      end else begin
        up_rdata_d <= 32'd0;
      end
    end
  end

endmodule

// ***************************************************************************
// ***************************************************************************