zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/xilinx/axi_adcfifo/axi_adcfifo.v

314 lines
9.8 KiB
Coq
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_adcfifo (
// fifo interface
adc_rst,
adc_clk,
adc_wr,
adc_wdata,
adc_wovf,
// dma interface
dma_clk,
dma_wr,
dma_wdata,
dma_wready,
dma_xfer_req,
dma_xfer_status,
// axi interface
axi_clk,
axi_resetn,
axi_awvalid,
axi_awid,
axi_awburst,
axi_awlock,
axi_awcache,
axi_awprot,
axi_awqos,
axi_awuser,
axi_awlen,
axi_awsize,
axi_awaddr,
axi_awready,
axi_wvalid,
axi_wdata,
axi_wstrb,
axi_wlast,
axi_wuser,
axi_wready,
axi_bvalid,
axi_bid,
axi_bresp,
axi_buser,
axi_bready,
axi_arvalid,
axi_arid,
axi_arburst,
axi_arlock,
axi_arcache,
axi_arprot,
axi_arqos,
axi_aruser,
axi_arlen,
axi_arsize,
axi_araddr,
axi_arready,
axi_rvalid,
axi_rid,
axi_ruser,
axi_rresp,
axi_rlast,
axi_rdata,
axi_rready);
// parameters
parameter ADC_DATA_WIDTH = 128;
parameter DMA_DATA_WIDTH = 64;
parameter AXI_DATA_WIDTH = 512;
parameter DMA_READY_ENABLE = 1;
parameter AXI_SIZE = 2;
parameter AXI_LENGTH = 16;
parameter AXI_ADDRESS = 32'h00000000;
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
parameter AXI_ADDRESS_LIMIT = 32'hffffffff;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// adc interface
input adc_rst;
input adc_clk;
input adc_wr;
input [ADC_DATA_WIDTH-1:0] adc_wdata;
output adc_wovf;
// dma interface
input dma_clk;
output dma_wr;
output [DMA_DATA_WIDTH-1:0] dma_wdata;
input dma_wready;
input dma_xfer_req;
output [ 3:0] dma_xfer_status;
// axi interface
input axi_clk;
input axi_resetn;
output axi_awvalid;
output [ 3:0] axi_awid;
output [ 1:0] axi_awburst;
output axi_awlock;
output [ 3:0] axi_awcache;
output [ 2:0] axi_awprot;
output [ 3:0] axi_awqos;
output [ 3:0] axi_awuser;
output [ 7:0] axi_awlen;
output [ 2:0] axi_awsize;
output [ 31:0] axi_awaddr;
input axi_awready;
output axi_wvalid;
output [AXI_DATA_WIDTH-1:0] axi_wdata;
axi_*fifo: Delete/replace AXI_BYTE_WIDTH parameter
2017-02-16 17:54:41 +00:00
output [(AXI_DATA_WIDTH/8)-1:0] axi_wstrb;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
output axi_wlast;
output [ 3:0] axi_wuser;
input axi_wready;
input axi_bvalid;
input [ 3:0] axi_bid;
input [ 1:0] axi_bresp;
input [ 3:0] axi_buser;
output axi_bready;
output axi_arvalid;
output [ 3:0] axi_arid;
output [ 1:0] axi_arburst;
output axi_arlock;
output [ 3:0] axi_arcache;
output [ 2:0] axi_arprot;
output [ 3:0] axi_arqos;
output [ 3:0] axi_aruser;
output [ 7:0] axi_arlen;
output [ 2:0] axi_arsize;
output [ 31:0] axi_araddr;
input axi_arready;
input axi_rvalid;
input [ 3:0] axi_rid;
input [ 3:0] axi_ruser;
input [ 1:0] axi_rresp;
input axi_rlast;
input [AXI_DATA_WIDTH-1:0] axi_rdata;
output axi_rready;
// internal signals
wire adc_dwr_s;
wire [AXI_DATA_WIDTH-1:0] adc_ddata_s;
wire axi_rd_req_s;
wire [ 31:0] axi_rd_addr_s;
wire [ 3:0] axi_xfer_status_s;
wire axi_drst_s;
wire axi_dvalid_s;
wire [AXI_DATA_WIDTH-1:0] axi_ddata_s;
wire axi_dready_s;
// instantiations
axi_adcfifo_adc #(
.AXI_DATA_WIDTH (AXI_DATA_WIDTH),
.ADC_DATA_WIDTH (ADC_DATA_WIDTH))
i_adc_if (
.adc_rst (adc_rst),
.adc_clk (adc_clk),
.adc_wr (adc_wr),
.adc_wdata (adc_wdata),
.adc_wovf (adc_wovf),
.adc_dwr (adc_dwr_s),
.adc_ddata (adc_ddata_s),
.axi_drst (axi_drst_s),
.axi_clk (axi_clk),
.axi_xfer_status (axi_xfer_status_s));
axi_adcfifo_wr #(
.AXI_DATA_WIDTH (AXI_DATA_WIDTH),
.AXI_SIZE (AXI_SIZE),
.AXI_LENGTH (AXI_LENGTH),
.AXI_ADDRESS (AXI_ADDRESS),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.AXI_ADDRESS_LIMIT (AXI_ADDRESS_LIMIT))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_wr (
.dma_xfer_req (dma_xfer_req),
.axi_rd_req (axi_rd_req_s),
.axi_rd_addr (axi_rd_addr_s),
.adc_rst (adc_rst),
.adc_clk (adc_clk),
.adc_wr (adc_dwr_s),
.adc_wdata (adc_ddata_s),
.axi_clk (axi_clk),
.axi_resetn (axi_resetn),
.axi_awvalid (axi_awvalid),
.axi_awid (axi_awid),
.axi_awburst (axi_awburst),
.axi_awlock (axi_awlock),
.axi_awcache (axi_awcache),
.axi_awprot (axi_awprot),
.axi_awqos (axi_awqos),
.axi_awuser (axi_awuser),
.axi_awlen (axi_awlen),
.axi_awsize (axi_awsize),
.axi_awaddr (axi_awaddr),
.axi_awready (axi_awready),
.axi_wvalid (axi_wvalid),
.axi_wdata (axi_wdata),
.axi_wstrb (axi_wstrb),
.axi_wlast (axi_wlast),
.axi_wuser (axi_wuser),
.axi_wready (axi_wready),
.axi_bvalid (axi_bvalid),
.axi_bid (axi_bid),
.axi_bresp (axi_bresp),
.axi_buser (axi_buser),
.axi_bready (axi_bready),
.axi_dwovf (axi_xfer_status_s[0]),
.axi_dwunf (axi_xfer_status_s[1]),
.axi_werror (axi_xfer_status_s[2]));
axi_adcfifo_rd #(
.AXI_DATA_WIDTH (AXI_DATA_WIDTH),
.AXI_SIZE (AXI_SIZE),
.AXI_LENGTH (AXI_LENGTH),
.AXI_ADDRESS (AXI_ADDRESS),
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.AXI_ADDRESS_LIMIT (AXI_ADDRESS_LIMIT))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_rd (
.dma_xfer_req (dma_xfer_req),
.axi_rd_req (axi_rd_req_s),
.axi_rd_addr (axi_rd_addr_s),
.axi_clk (axi_clk),
.axi_resetn (axi_resetn),
.axi_arvalid (axi_arvalid),
.axi_arid (axi_arid),
.axi_arburst (axi_arburst),
.axi_arlock (axi_arlock),
.axi_arcache (axi_arcache),
.axi_arprot (axi_arprot),
.axi_arqos (axi_arqos),
.axi_aruser (axi_aruser),
.axi_arlen (axi_arlen),
.axi_arsize (axi_arsize),
.axi_araddr (axi_araddr),
.axi_arready (axi_arready),
.axi_rvalid (axi_rvalid),
.axi_rid (axi_rid),
.axi_ruser (axi_ruser),
.axi_rresp (axi_rresp),
.axi_rlast (axi_rlast),
.axi_rdata (axi_rdata),
.axi_rready (axi_rready),
.axi_rerror (axi_xfer_status_s[3]),
.axi_drst (axi_drst_s),
.axi_dvalid (axi_dvalid_s),
.axi_ddata (axi_ddata_s),
.axi_dready (axi_dready_s));
axi_adcfifo_dma #(
.AXI_DATA_WIDTH (AXI_DATA_WIDTH),
.DMA_DATA_WIDTH (DMA_DATA_WIDTH),
.DMA_READY_ENABLE (DMA_READY_ENABLE))
i_dma_if (
.axi_clk (axi_clk),
.axi_drst (axi_drst_s),
.axi_dvalid (axi_dvalid_s),
.axi_ddata (axi_ddata_s),
.axi_dready (axi_dready_s),
.axi_xfer_status (axi_xfer_status_s),
.dma_clk (dma_clk),
.dma_wr (dma_wr),
.dma_wdata (dma_wdata),
.dma_wready (dma_wready),
.dma_xfer_req (dma_xfer_req),
.dma_xfer_status (dma_xfer_status));
endmodule
// ***************************************************************************
// ***************************************************************************