zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/jesd204/jesd204_tx/Makefile

45 lines
1.7 KiB
Makefile
Raw Normal View History

Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
####################################################################################
Makefiles: Update header with the appropriate license
2021-09-15 15:03:11 +00:00
## Copyright (c) 2018 - 2021 Analog Devices, Inc.
### SPDX short identifier: BSD-1-Clause
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
## Auto-generated, do not modify!
####################################################################################
Regenerate library Makefiles using the new shared Makefile include This reduces the amount of boilerplate code that is present in these Makefiles by a lot. It also makes it possible to update the Makefile rules in future without having to re-generate all the Makefiles. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-03-23 09:19:51 +00:00
LIBRARY_NAME := jesd204_tx
jesd204: Fix file names All the file names must have the same name as its module. Change all the files, which did not respect this rule. Update all the make files and Tcl scripts.
2018-03-28 13:44:06 +00:00
GENERIC_DEPS += jesd204_tx.v
GENERIC_DEPS += jesd204_tx_ctrl.v
GENERIC_DEPS += jesd204_tx_lane.v
Move Altera IP core dependency tracking to library Makefiles Currently the individual IP core dependencies are tracked inside the library Makefile for Xilinx IPs and the project Makefiles only reference the IP cores. For Altera on the other hand the individual dependencies are tracked inside the project Makefile. This leads to a lot of duplicated lists and also means that the project Makefiles need to be regenerated when one of the IP cores changes their files. Change the Altera projects to a similar scheme than the Xilinx projects. The projects themselves only reference the library as a whole as their dependency while the library Makefile references the individual source dependencies. Since on Altera there is no target that has to be generated create a dummy target called ".timestamp_altera" who's only purpose is to have a timestamp that is greater or equal to the timestamp of all of the IP core files. This means the project Makefile can have a dependency on this file and make sure that the project will be rebuild if any of the files in the library changes. This patch contains quite a bit of churn, but hopefully it reduces the amount of churn in the future when modifying Altera IP cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-03-27 09:21:09 +00:00
jesd204_rx/tx: make SYSREF IOB placement optional In case when the SYSREF is connected to an FPGA IO which has a limitation on the IOB register IN_FF clock line and the required ref clock is high we can't use the IOB registers. e.g. the max clock rate on zcu102 HP IO FF is 312MHz but ref clock is 375MHz; If IOB is used in this case a pulse width violation is reported. This change makes the IOB placement selectable in such case or for targets which don't require class 1 operation.
2018-07-23 11:58:46 +00:00
XILINX_DEPS += jesd204_tx_constr.ttcl
jesd204: Add out of context constraint file for link layer cores For the out of context flow it is important to have all clocks defined at the interface, especially if the clock are used in the other constraints.
2021-04-21 12:53:45 +00:00
XILINX_DEPS += jesd204_tx_ooc.ttcl
jesd204_tx: Support for 64b mode in transmit peripheral Instantiate 64B/66B mode encoder based on synthesis parameter.
2019-10-01 15:12:11 +00:00
XILINX_DEPS += jesd204_tx_header.v
Move Altera IP core dependency tracking to library Makefiles Currently the individual IP core dependencies are tracked inside the library Makefile for Xilinx IPs and the project Makefiles only reference the IP cores. For Altera on the other hand the individual dependencies are tracked inside the project Makefile. This leads to a lot of duplicated lists and also means that the project Makefiles need to be regenerated when one of the IP cores changes their files. Change the Altera projects to a similar scheme than the Xilinx projects. The projects themselves only reference the library as a whole as their dependency while the library Makefile references the individual source dependencies. Since on Altera there is no target that has to be generated create a dummy target called ".timestamp_altera" who's only purpose is to have a timestamp that is greater or equal to the timestamp of all of the IP core files. This means the project Makefile can have a dependency on this file and make sure that the project will be rebuild if any of the files in the library changes. This patch contains quite a bit of churn, but hopefully it reduces the amount of churn in the future when modifying Altera IP cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-03-27 09:21:09 +00:00
XILINX_DEPS += jesd204_tx_ip.tcl
jesd204_tx: Support for 64b mode in transmit peripheral Instantiate 64B/66B mode encoder based on synthesis parameter.
2019-10-01 15:12:11 +00:00
XILINX_DEPS += jesd204_tx_lane_64b.v
Move Altera IP core dependency tracking to library Makefiles Currently the individual IP core dependencies are tracked inside the library Makefile for Xilinx IPs and the project Makefiles only reference the IP cores. For Altera on the other hand the individual dependencies are tracked inside the project Makefile. This leads to a lot of duplicated lists and also means that the project Makefiles need to be regenerated when one of the IP cores changes their files. Change the Altera projects to a similar scheme than the Xilinx projects. The projects themselves only reference the library as a whole as their dependency while the library Makefile references the individual source dependencies. Since on Altera there is no target that has to be generated create a dummy target called ".timestamp_altera" who's only purpose is to have a timestamp that is greater or equal to the timestamp of all of the IP core files. This means the project Makefile can have a dependency on this file and make sure that the project will be rebuild if any of the files in the library changes. This patch contains quite a bit of churn, but hopefully it reduces the amount of churn in the future when modifying Altera IP cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-03-27 09:21:09 +00:00
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_cfg.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_cfg_rtl.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_ctrl.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_ctrl_rtl.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_event.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_event_rtl.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_ilas_config.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_ilas_config_rtl.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_status.xml
XILINX_DEPS += ../../jesd204/interfaces/jesd204_tx_status_rtl.xml
jesd204: Xilinx: NP=12 support To support deterministic latency with non-power of two octets per frame (F=3,6) the interface width towards the transport layer must be resized to match integer multiple of frames. e.g Input datapath width = 4; Output datpath width = 6; for F=3 one beat contains 2 frames for F=6 one beat contains 1 frame The width change is realized with a gearbox. Due the interface width change the single clock domain core is split in two clock domains. - Link clock : lane rate / 40 for input datapath width of 4 octets 8b10b - lane rate / 20 for input datapath width of 8 octets 8b10b - lane rate / 66 for input datapath width of 8 octets 64b66b - Device clock : Link clock * input data path width / output datapath width Interface to transport layer and SYSREF handling is moved to device clock domain. The configuration interface reflects the dual clock domain. If Input and Output datapath width matches, the gearbox is no longer required, a single clock can be connected to both clocks.
2020-10-27 15:40:37 +00:00
XILINX_DEPS += bd/bd.tcl
Move Altera IP core dependency tracking to library Makefiles Currently the individual IP core dependencies are tracked inside the library Makefile for Xilinx IPs and the project Makefiles only reference the IP cores. For Altera on the other hand the individual dependencies are tracked inside the project Makefile. This leads to a lot of duplicated lists and also means that the project Makefiles need to be regenerated when one of the IP cores changes their files. Change the Altera projects to a similar scheme than the Xilinx projects. The projects themselves only reference the library as a whole as their dependency while the library Makefile references the individual source dependencies. Since on Altera there is no target that has to be generated create a dummy target called ".timestamp_altera" who's only purpose is to have a timestamp that is greater or equal to the timestamp of all of the IP core files. This means the project Makefile can have a dependency on this file and make sure that the project will be rebuild if any of the files in the library changes. This patch contains quite a bit of churn, but hopefully it reduces the amount of churn in the future when modifying Altera IP cores. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-03-27 09:21:09 +00:00
XILINX_LIB_DEPS += jesd204/jesd204_common
XILINX_LIB_DEPS += util_cdc
XILINX_INTERFACE_DEPS += jesd204/interfaces
all: Rename altera to intel
2018-08-13 13:59:02 +00:00
INTEL_DEPS += ../../util_cdc/sync_bits.v
INTEL_DEPS += ../jesd204_common/jesd204_eof_generator.v
INTEL_DEPS += ../jesd204_common/jesd204_lmfc.v
INTEL_DEPS += ../jesd204_common/jesd204_scrambler.v
jesd204_tx: Support for 64b mode in transmit peripheral Instantiate 64B/66B mode encoder based on synthesis parameter.
2019-10-01 15:12:11 +00:00
INTEL_DEPS += ../jesd204_common/pipeline_stage.v
all: Rename altera to intel
2018-08-13 13:59:02 +00:00
INTEL_DEPS += jesd204_tx_constr.sdc
INTEL_DEPS += jesd204_tx_hw.tcl
Add ADI JESD204 link layer cores The ADI JESD204 link layer cores are a implementation of the JESD204 link layer. They are responsible for handling the control signals (like SYNC and SYSREF) and controlling the link state machine as well as performing per-lane (de-)scrambling and character replacement. Architecturally the cores are separated into two components. 1) Protocol processing cores (jesd204_rx, jesd204_tx). These cores take care of the JESD204 protocol handling. They have configuration and status ports that allows to configure their behaviour and monitor the current state. The processing cores run entirely in the lane_rate/40 clock domain. They have a upstream and a downstream port that accept and generate raw PHY level data and transport level payload data (which is which depends on the direction of the core). 2) Configuration interface cores (axi_jesd204_rx, axi_jesd204_tx). The configuration interface cores provide a register map interface that allow access to the to the configuration and status interfaces of the processing cores. The configuration cores are responsible for implementing the clock domain crossing between the lane_rate/40 and register map clock domain. These new cores are compatible to all ADI converter products using the JESD204 interface. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-05-17 17:28:50 +00:00
Regenerate library Makefiles using the new shared Makefile include This reduces the amount of boilerplate code that is present in these Makefiles by a lot. It also makes it possible to update the Makefile rules in future without having to re-generate all the Makefiles. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2018-03-23 09:19:51 +00:00
include ../../scripts/library.mk