pluto_hdl_adi/library/axi_dmac/2d_transfer.v

141 lines
4.6 KiB
Coq
Raw Normal View History

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
2018-03-14 14:45:47 +00:00
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory
// of this repository (LICENSE_GPL2), and also online at:
// <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
// 2. An ADI specific BSD license, which can be found in the top level directory
// of this repository (LICENSE_ADIBSD), and also on-line at:
// https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
// This will allow to generate bit files and not release the source code,
// as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************
module dmac_2d_transfer #(
parameter DMA_LENGTH_WIDTH = 24,
parameter BYTES_PER_BEAT_WIDTH_SRC = 3,
parameter BYTES_PER_BEAT_WIDTH_DEST = 3)(
input req_aclk,
input req_aresetn,
input req_valid,
output reg req_ready,
input [31:BYTES_PER_BEAT_WIDTH_DEST] req_dest_address,
input [31:BYTES_PER_BEAT_WIDTH_SRC] req_src_address,
input [DMA_LENGTH_WIDTH-1:0] req_x_length,
input [DMA_LENGTH_WIDTH-1:0] req_y_length,
input [DMA_LENGTH_WIDTH-1:0] req_dest_stride,
input [DMA_LENGTH_WIDTH-1:0] req_src_stride,
input req_sync_transfer_start,
output reg req_eot,
output reg out_req_valid,
input out_req_ready,
output [31:BYTES_PER_BEAT_WIDTH_DEST] out_req_dest_address,
output [31:BYTES_PER_BEAT_WIDTH_SRC] out_req_src_address,
output [DMA_LENGTH_WIDTH-1:0] out_req_length,
output reg out_req_sync_transfer_start,
input out_eot
);
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
reg [31:BYTES_PER_BEAT_WIDTH_DEST] dest_address;
reg [31:BYTES_PER_BEAT_WIDTH_SRC] src_address;
reg [DMA_LENGTH_WIDTH-1:0] x_length;
reg [DMA_LENGTH_WIDTH-1:0] y_length;
reg [DMA_LENGTH_WIDTH-1:0] dest_stride;
reg [DMA_LENGTH_WIDTH-1:0] src_stride;
reg [1:0] req_id;
reg [1:0] eot_id;
reg [3:0] last_req;
assign out_req_dest_address = dest_address;
assign out_req_src_address = src_address;
assign out_req_length = x_length;
always @(posedge req_aclk)
begin
if (req_aresetn == 1'b0) begin
req_id <= 2'b0;
eot_id <= 2'b0;
req_eot <= 1'b0;
end else begin
if (out_req_valid && out_req_ready) begin
req_id <= req_id + 1'b1;
last_req[req_id] <= y_length == 0;
end
req_eot <= 1'b0;
if (out_eot) begin
eot_id <= eot_id + 1'b1;
req_eot <= last_req[eot_id];
end
end
end
always @(posedge req_aclk)
begin
if (req_aresetn == 1'b0) begin
dest_address <= 'h00;
src_address <= 'h00;
x_length <= 'h00;
y_length <= 'h00;
dest_stride <= 'h00;
src_stride <= 'h00;
req_ready <= 1'b1;
out_req_valid <= 1'b0;
out_req_sync_transfer_start <= 1'b0;
end else begin
if (req_ready) begin
if (req_valid) begin
dest_address <= req_dest_address;
src_address <= req_src_address;
x_length <= req_x_length;
y_length <= req_y_length;
dest_stride <= req_dest_stride;
src_stride <= req_src_stride;
out_req_sync_transfer_start <= req_sync_transfer_start;
req_ready <= 1'b0;
out_req_valid <= 1'b1;
end
end else begin
if (out_req_valid && out_req_ready) begin
dest_address <= dest_address + dest_stride[DMA_LENGTH_WIDTH-1:BYTES_PER_BEAT_WIDTH_DEST];
src_address <= src_address + src_stride[DMA_LENGTH_WIDTH-1:BYTES_PER_BEAT_WIDTH_SRC];
y_length <= y_length - 1'b1;
out_req_sync_transfer_start <= 1'b0;
if (y_length == 0) begin
out_req_valid <= 1'b0;
req_ready <= 1'b1;
end
end
end
end
end
endmodule