pluto_hdl_adi/library/jesd204/jesd204_tx/jesd204_tx_ctrl.v

//
// The ADI JESD204 Core is released under the following license, which is
// different than all other HDL cores in this repository.
//
// Please read this, and understand the freedoms and responsibilities you have
// by using this source code/core.
//
// The JESD204 HDL, is copyright © 2016-2017 Analog Devices Inc.
//
// This core is free software, you can use run, copy, study, change, ask
// questions about and improve this core. Distribution of source, or resulting
// binaries (including those inside an FPGA or ASIC) require you to release the
// source of the entire project (excluding the system libraries provide by the
// tools/compiler/FPGA vendor). These are the terms of the GNU General Public
// License version 2 as published by the Free Software Foundation.
//
// This core  is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE. See the GNU General Public License for more details.
//
// You should have received a copy of the GNU General Public License version 2
// along with this source code, and binary.  If not, see
// <http://www.gnu.org/licenses/>.
//
// Commercial licenses (with commercial support) of this JESD204 core are also
// available under terms different than the General Public License. (e.g. they
// do not require you to accompany any image (FPGA or ASIC) using the JESD204
// core with any corresponding source code.) For these alternate terms you must
// purchase a license from Analog Devices Technology Licensing Office. Users
// interested in such a license should contact jesd204-licensing@analog.com for
// more information. This commercial license is sub-licensable (if you purchase
// chips from Analog Devices, incorporate them into your PCB level product, and
// purchase a JESD204 license, end users of your product will also have a
// license to use this core in a commercial setting without releasing their
// source code).
//
// In addition, we kindly ask you to acknowledge ADI in any program, application
// or publication in which you use this JESD204 HDL core. (You are not required
// to do so; it is up to your common sense to decide whether you want to comply
// with this request or not.) For general publications, we suggest referencing :
// “The design and implementation of the JESD204 HDL Core used in this project
// is copyright © 2016-2017, Analog Devices, Inc.”
//

`timescale 1ns/100ps

module jesd204_tx_ctrl #(
  parameter NUM_LANES = 1,
  parameter NUM_LINKS = 1,
  parameter DATA_PATH_WIDTH = 4
) (
  input clk,
  input reset,

  input [NUM_LINKS-1:0] sync,
  input lmfc_edge,
  input [DATA_PATH_WIDTH-1:0] somf,
  input [DATA_PATH_WIDTH-1:0] somf_early2,
  input [DATA_PATH_WIDTH-1:0] eomf,

  output reg [NUM_LANES-1:0] lane_cgs_enable,
  output reg eof_reset,

  output reg tx_ready,
  output tx_ready_nx,
  output tx_next_mf_ready,

  output reg [DATA_PATH_WIDTH*8*NUM_LANES-1:0] ilas_data,
  output reg [DATA_PATH_WIDTH*NUM_LANES-1:0] ilas_charisk,

  output reg [1:0] ilas_config_addr,
  output reg ilas_config_rd,
  input [DATA_PATH_WIDTH*8*NUM_LANES-1:0] ilas_config_data,

  input [NUM_LANES-1:0] cfg_lanes_disable,
  input [NUM_LINKS-1:0] cfg_links_disable,
  input cfg_continuous_cgs,
  input cfg_continuous_ilas,
  input cfg_skip_ilas,
  input [7:0] cfg_mframes_per_ilas,
  input [9:0] cfg_octets_per_multiframe,
  input ctrl_manual_sync_request,

  output [NUM_LINKS-1:0] status_sync,
  output reg [1:0] status_state
);

localparam ILAS_DATA_LENGTH = (DATA_PATH_WIDTH == 4) ? 4 : 2;
localparam ILAS_COUNTER_WIDTH = (DATA_PATH_WIDTH == 4) ? 6 : 5;
localparam DPW_LOG2 = DATA_PATH_WIDTH == 8 ? 3 : DATA_PATH_WIDTH == 4 ? 2 : 1;
localparam BEATS_PER_MF_WIDTH = 10-DPW_LOG2;

// For DATA_PATH_WIDTH = 8, special case if F*K%8=4
//   Multiframe boundaries can occur in the middle of a beat
//   jesd204_lmfc will assert lmfc_edge once per two LMFC periods
//   cfg_mframes_per_ilas must be even
wire [BEATS_PER_MF_WIDTH-1:0] cfg_beats_per_multiframe = cfg_octets_per_multiframe[9:DPW_LOG2];
wire octets_per_mf_4_mod_8 = (DATA_PATH_WIDTH == 8) && ~cfg_octets_per_multiframe[2];
wire [7:0] cfg_lmfc_per_ilas = octets_per_mf_4_mod_8 ? cfg_mframes_per_ilas/2 : cfg_mframes_per_ilas;
reg lmfc_edge_d1 = 1'b0;
reg lmfc_edge_d2 = 1'b0;
reg eof_reset_d;
reg ilas_reset = 1'b1;
reg ilas_data_reset = 1'b1;
reg sync_request = 1'b0;
reg sync_request_received = 1'b0;
reg last_ilas_mframe = 1'b0;
reg [7:0] mframe_counter = 'h00;
reg [ILAS_COUNTER_WIDTH-1:0] ilas_counter = 'h00;
wire ilas_config_rd_start;
reg ilas_config_rd_d1 = 1'b1;
reg cgs_enable = 1'b1;
wire [DATA_PATH_WIDTH*8-1:0] ilas_default_data;

wire [NUM_LINKS-1:0] status_sync_masked;

genvar ii;
genvar jj;

sync_bits #(
  .NUM_OF_BITS (NUM_LINKS))
i_cdc_sync (
  .in_bits(sync),
  .out_clk(clk),
  .out_resetn(1'b1),
  .out_bits(status_sync)
);

assign status_sync_masked = status_sync | cfg_links_disable;

always @(posedge clk) begin
  if (reset == 1'b1) begin
    sync_request <= {NUM_LINKS{1'b0}};
  end else begin
    /* TODO: SYNC must be asserted at least 4 frames before interpreted as a
     * sync request and the /K28.5/ symbol generation has lasted for at
     * least 1 frame + 9 octets */
    if (cfg_continuous_cgs == 1'b1) begin
      sync_request <= 1'b1;
    end else begin
      sync_request <= ~(&status_sync_masked) | ctrl_manual_sync_request;
    end
  end
end

always @(posedge clk) begin
  if (sync_request == 1'b0 && sync_request_received == 1'b1) begin
    lmfc_edge_d1 <= lmfc_edge;
    lmfc_edge_d2 <= lmfc_edge_d1;
  end else begin
    lmfc_edge_d1 <= 1'b0;
    lmfc_edge_d2 <= 1'b0;
  end
end

always @(posedge clk) begin
  if (reset == 1'b1) begin
    sync_request_received <= 1'b0;
  end else if (sync_request == 1'b1) begin
    sync_request_received <= 1'b1;
  end
end

always @(posedge clk) begin
  if (cfg_skip_ilas == 1'b1 ||
    mframe_counter == cfg_lmfc_per_ilas) begin
    last_ilas_mframe <= 1'b1;
  end else begin
    last_ilas_mframe <= 1'b0;
  end
end

always @(*) begin
  if (sync_request == 1'b1 || reset == 1'b1) begin
    eof_reset = 1'b1;
  end else if (lmfc_edge == 1'b1 && sync_request_received == 1'b1) begin
    eof_reset = 1'b0;
  end else begin
    eof_reset = eof_reset_d;
  end
end

always @(posedge clk) begin
  eof_reset_d <= eof_reset;
end

localparam STATE_WAIT = 2'b00;
localparam STATE_CGS = 2'b01;
localparam STATE_ILAS = 2'b10;
localparam STATE_DATA = 2'b11;

/* Timeline
 *
 * #1 lmfc_edge == 1, ilas_reset update
 * #3 {lane_,}cgs_enable, tx_ready update
 *
 * One multi-frame should at least be 3 clock cycles (TBD 64-bit data path)
 */

always @(posedge clk) begin
  if (sync_request == 1'b1 || reset == 1'b1) begin
    cgs_enable <= 1'b1;
    lane_cgs_enable <= {NUM_LANES{1'b1}};
    tx_ready <= 1'b0;
    ilas_reset <= 1'b1;
    ilas_data_reset <= 1'b1;

    if (sync_request_received == 1'b0) begin
      status_state <= STATE_WAIT;
    end else begin
      status_state <= STATE_CGS;
    end
  end else if (sync_request_received == 1'b1) begin
    if (lmfc_edge == 1'b1 && last_ilas_mframe == 1'b1) begin
      ilas_reset <= 1'b1;
      status_state <= STATE_DATA;
    end else if (lmfc_edge_d1 == 1'b1 && (cfg_continuous_ilas == 1'b1 ||
      cgs_enable == 1'b1)) begin
      ilas_reset <= 1'b0;
      status_state <= STATE_ILAS;
    end

    if (lmfc_edge_d1 == 1'b1) begin
      if (last_ilas_mframe == 1'b1 && cfg_continuous_ilas == 1'b0) begin
        ilas_data_reset <= 1'b1;
      end else if (cgs_enable == 1'b1) begin
        ilas_data_reset <= 1'b0;
      end
    end

    if (lmfc_edge_d2 == 1'b1) begin
      lane_cgs_enable <= cfg_lanes_disable;
      cgs_enable <= 1'b0;
      if (last_ilas_mframe == 1'b1 && cfg_continuous_ilas == 1'b0) begin
        tx_ready <= 1'b1;
      end
    end
  end
end

assign tx_next_mf_ready = sync_request_received & last_ilas_mframe & ~cfg_continuous_ilas;
assign tx_ready_nx = tx_ready | (tx_next_mf_ready & lmfc_edge_d2);

always @(posedge clk) begin
  if (ilas_reset == 1'b1) begin
    mframe_counter <= 'h00;
  end else if (lmfc_edge_d1 == 1'b1) begin
    mframe_counter <= mframe_counter + 1'b1;
  end
end

always @(posedge clk) begin
  if (ilas_reset == 1'b1) begin
    ilas_config_rd <= 1'b0;
  end else if (ilas_config_rd_start == 1'b1) begin
    ilas_config_rd <= 1'b1;
  end else if (ilas_config_addr == (ILAS_DATA_LENGTH-1)) begin
    ilas_config_rd <= 1'b0;
  end
  ilas_config_rd_d1 <= ilas_config_rd;
end

always @(posedge clk) begin
  if (ilas_config_rd == 1'b0) begin
    ilas_config_addr <= 'h00;
  end else begin
    ilas_config_addr <= ilas_config_addr + 1'b1;
  end
end

always @(posedge clk) begin
  if (ilas_reset == 1'b1) begin
    ilas_counter <= 'h00;
  end else begin
    ilas_counter <= ilas_counter + 1'b1;
  end
end

generate
for(ii = 0; ii < DATA_PATH_WIDTH; ii=ii+1) begin : gen_default_data
wire [(8-ILAS_COUNTER_WIDTH)-1:0] ii_sig = ii;
assign ilas_default_data[(ii*8)+7:ii*8] = {ilas_counter, ii_sig};
end
endgenerate

generate
if(DATA_PATH_WIDTH == 4) begin : gen_dp4

assign ilas_config_rd_start = mframe_counter == 'h00 && somf_early2[0];

always @(posedge clk) begin
  if (ilas_data_reset == 1'b1) begin
    ilas_data <= {NUM_LANES{32'h00}};
    ilas_charisk <= {NUM_LANES{4'b0000}};
  end else begin
    if (ilas_config_rd_d1 == 1'b1) begin
      case (ilas_config_addr)
      2'h1: begin
        ilas_data <= (ilas_config_data & {NUM_LANES{32'hffff0000}}) |
          {NUM_LANES{16'h00,8'h9c,8'h1c}}; // /Q/ /R/
        ilas_charisk <= {NUM_LANES{4'b0011}};
      end
      default: begin
        ilas_data <= ilas_config_data;
        ilas_charisk <= {NUM_LANES{4'b0000}};
      end
      endcase
    end else if (lmfc_edge_d2 == 1'b1) begin
      ilas_data <= {NUM_LANES{ilas_default_data[31:8],8'h1c}}; // /R/
      ilas_charisk <= {NUM_LANES{4'b0001}};
    end else if (lmfc_edge_d1 == 1'b1) begin
      ilas_data <= {NUM_LANES{8'h7c,ilas_default_data[23:0]}}; // /A/
      ilas_charisk <= {NUM_LANES{4'b1000}};
    end else begin
      ilas_data <= {NUM_LANES{ilas_default_data}};
      ilas_charisk <= {NUM_LANES{4'b0000}};
    end
  end
end

end else if(DATA_PATH_WIDTH == 8) begin : gen_dp8

reg [63:0] ilas_config_data_d[NUM_LANES-1:0];
reg ilas_config_rd_d2 = 1'b0;

always @(posedge clk) begin
  ilas_config_rd_d2 <= ilas_config_rd_d1;
end

for(jj = 0; jj < NUM_LANES; jj = jj + 1) begin : gen_dp8_lane

assign ilas_config_rd_start = (mframe_counter == 'h00) && (octets_per_mf_4_mod_8 ? somf_early2[4] : somf_early2[0]);

always @(posedge clk) begin
  ilas_config_data_d[jj] <= {32'b0, ilas_config_data[(jj*64)+32+:32]};
end

for(ii = 0; ii < DATA_PATH_WIDTH; ii=ii+1) begin : gen_ilas_data

always @(posedge clk) begin
  if (ilas_data_reset) begin
    ilas_data[(jj*64)+(ii*8)+:8] <= 8'h00;
    ilas_charisk[(jj*8)+ii] <= 1'b0;
  end else begin
    if(somf[ii]) begin
      ilas_data[(jj*64)+(ii*8)+:8] <= 8'h1c; // /R/
      ilas_charisk[(jj*8)+ii] <= 1'b1;
    end else if(eomf[ii]) begin
      ilas_data[(jj*64)+(ii*8)+:8] <= 8'h7c; // /A/
      ilas_charisk[(jj*8)+ii] <= 1'b1;
    end else if (ilas_config_rd_d1 &&
                 (ilas_config_addr == 2'h1) && 
                 ((octets_per_mf_4_mod_8 && (ii == 5)) ||
                   (!octets_per_mf_4_mod_8 && (ii == 1)))) begin
        ilas_data[(jj*64)+(ii*8)+:8] <= 8'h9c; // /Q/
        ilas_charisk[(jj*8)+ii] <= 1'b1;
    end else if (octets_per_mf_4_mod_8 && ilas_config_rd_d2 && (ii < 4)) begin
      ilas_data[(jj*64)+(ii*8)+:8] <= ilas_config_data_d[jj][ii*8+:8];
      ilas_charisk[(jj*8)+ii] <= 1'b0;
    end else if (octets_per_mf_4_mod_8 && ilas_config_rd_d1 && (ii >= 4)) begin
      ilas_data[(jj*64)+(ii*8)+:8] <= ilas_config_data[(jj*64)+((ii-4)*8)+:8];
      ilas_charisk[(jj*8)+ii] <= 1'b0;
    end else if (!octets_per_mf_4_mod_8 && ilas_config_rd_d1) begin
      ilas_data[(jj*64)+(ii*8)+:8] <= ilas_config_data[(jj*64)+(ii*8)+:8];
      ilas_charisk[(jj*8)+ii] <= 1'b0;
    end else begin
      ilas_data[(jj*64)+(ii*8)+:8] <= ilas_default_data[ii*8+:8];
      ilas_charisk[(jj*8)+ii] <= 1'b0;
    end
  end
end

end
end
end
endgenerate

endmodule