zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/library/axi_ad9361/axi_ad9361.v

605 lines
16 KiB
Coq
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// ***************************************************************************
// ***************************************************************************
// Copyright 2011(c) Analog Devices, Inc.
//
// All rights reserved.
//
// Redistribution and use in source and binary forms, with or without modification,
// are permitted provided that the following conditions are met:
// - Redistributions of source code must retain the above copyright
// notice, this list of conditions and the following disclaimer.
// - Redistributions in binary form must reproduce the above copyright
// notice, this list of conditions and the following disclaimer in
// the documentation and/or other materials provided with the
// distribution.
// - Neither the name of Analog Devices, Inc. nor the names of its
// contributors may be used to endorse or promote products derived
// from this software without specific prior written permission.
// - The use of this software may or may not infringe the patent rights
// of one or more patent holders. This license does not release you
// from the requirement that you obtain separate licenses from these
// patent holders to use this software.
// - Use of the software either in source or binary form, must be run
// on or directly connected to an Analog Devices Inc. component.
//
// THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
// INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
// PARTICULAR PURPOSE ARE DISCLAIMED.
//
// IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
// EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
// RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
// BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
// STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
// THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/100ps
module axi_ad9361 (
// physical interface (receive)
rx_clk_in_p,
rx_clk_in_n,
rx_frame_in_p,
rx_frame_in_n,
rx_data_in_p,
rx_data_in_n,
// physical interface (transmit)
tx_clk_out_p,
tx_clk_out_n,
tx_frame_out_p,
tx_frame_out_n,
tx_data_out_p,
tx_data_out_n,
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
// ensm control
enable,
txnrx,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// transmit master/slave
dac_sync_in,
dac_sync_out,
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
// tdd sync (1s pulse)
axi_ad9361: Delete the old sync generator from the core + Define two control signal for util_tdd_sync : tdd_sync_en and tdd_terminal_type + Delete to old ad_tdd_sync.v instances from the core + Update Make files + Update ad_tdd_control: add additional CDC logic for tdd_sync (the sync comes from another clock domain) + Update the ad_tdd_sync module: it's just a simple pulse generator, the pulse period is defined using a parameter, pulse width is fixed: 128 x clock cycle + Update TDD regmap: tdd sync period is no longer software defined
2015-11-11 09:06:19 +00:00
tdd_sync,
util_tdd_sync: Update the synchronization interface Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-10 10:43:16 +00:00
tdd_sync_cntr,
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// delay clock
delay_clk,
// master interface
l_clk,
clk,
rst,
// dma interface
adc_enable_i0,
adc_valid_i0,
adc_data_i0,
adc_enable_q0,
adc_valid_q0,
adc_data_q0,
adc_enable_i1,
adc_valid_i1,
adc_data_i1,
adc_enable_q1,
adc_valid_q1,
adc_data_q1,
adc_dovf,
adc_dunf,
adc_r1_mode,
dac_enable_i0,
dac_valid_i0,
dac_data_i0,
dac_enable_q0,
dac_valid_q0,
dac_data_q0,
dac_enable_i1,
dac_valid_i1,
dac_data_i1,
dac_enable_q1,
dac_valid_q1,
dac_data_q1,
dac_dovf,
dac_dunf,
dac_r1_mode,
// axi interface
s_axi_aclk,
s_axi_aresetn,
s_axi_awvalid,
s_axi_awaddr,
s_axi_awprot,
s_axi_awready,
s_axi_wvalid,
s_axi_wdata,
s_axi_wstrb,
s_axi_wready,
s_axi_bvalid,
s_axi_bresp,
s_axi_bready,
s_axi_arvalid,
s_axi_araddr,
s_axi_arprot,
s_axi_arready,
s_axi_rvalid,
s_axi_rdata,
s_axi_rresp,
s_axi_rready,
// gpio
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
up_enable,
up_txnrx,
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
up_dac_gpio_in,
up_dac_gpio_out,
up_adc_gpio_in,
up_adc_gpio_out,
// chipscope signals
tdd_dbg);
// parameters
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
parameter ID = 0;
parameter DEVICE_TYPE = 0;
parameter DAC_IODELAY_ENABLE = 0;
parameter IO_DELAY_GROUP = "dev_if_delay_group";
parameter DAC_DATAPATH_DISABLE = 0;
parameter ADC_DATAPATH_DISABLE = 0;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// physical interface (receive)
input rx_clk_in_p;
input rx_clk_in_n;
input rx_frame_in_p;
input rx_frame_in_n;
input [ 5:0] rx_data_in_p;
input [ 5:0] rx_data_in_n;
// physical interface (transmit)
output tx_clk_out_p;
output tx_clk_out_n;
output tx_frame_out_p;
output tx_frame_out_n;
output [ 5:0] tx_data_out_p;
output [ 5:0] tx_data_out_n;
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
// ensm control
output enable;
output txnrx;
// transmit master/slave
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
input dac_sync_in;
output dac_sync_out;
axi_ad9361: Delete the old sync generator from the core + Define two control signal for util_tdd_sync : tdd_sync_en and tdd_terminal_type + Delete to old ad_tdd_sync.v instances from the core + Update Make files + Update ad_tdd_control: add additional CDC logic for tdd_sync (the sync comes from another clock domain) + Update the ad_tdd_sync module: it's just a simple pulse generator, the pulse period is defined using a parameter, pulse width is fixed: 128 x clock cycle + Update TDD regmap: tdd sync period is no longer software defined
2015-11-11 09:06:19 +00:00
// tdd sync
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
axi_ad9361: Delete the old sync generator from the core + Define two control signal for util_tdd_sync : tdd_sync_en and tdd_terminal_type + Delete to old ad_tdd_sync.v instances from the core + Update Make files + Update ad_tdd_control: add additional CDC logic for tdd_sync (the sync comes from another clock domain) + Update the ad_tdd_sync module: it's just a simple pulse generator, the pulse period is defined using a parameter, pulse width is fixed: 128 x clock cycle + Update TDD regmap: tdd sync period is no longer software defined
2015-11-11 09:06:19 +00:00
input tdd_sync;
util_tdd_sync: Update the synchronization interface Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-10 10:43:16 +00:00
output tdd_sync_cntr;
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// delay clock
input delay_clk;
// master interface
output l_clk;
input clk;
output rst;
// dma interface
output adc_enable_i0;
output adc_valid_i0;
output [15:0] adc_data_i0;
output adc_enable_q0;
output adc_valid_q0;
output [15:0] adc_data_q0;
output adc_enable_i1;
output adc_valid_i1;
output [15:0] adc_data_i1;
output adc_enable_q1;
output adc_valid_q1;
output [15:0] adc_data_q1;
input adc_dovf;
input adc_dunf;
output adc_r1_mode;
output dac_enable_i0;
output dac_valid_i0;
input [15:0] dac_data_i0;
output dac_enable_q0;
output dac_valid_q0;
input [15:0] dac_data_q0;
output dac_enable_i1;
output dac_valid_i1;
input [15:0] dac_data_i1;
output dac_enable_q1;
output dac_valid_q1;
input [15:0] dac_data_q1;
input dac_dovf;
input dac_dunf;
output dac_r1_mode;
// axi interface
input s_axi_aclk;
input s_axi_aresetn;
input s_axi_awvalid;
input [31:0] s_axi_awaddr;
input [ 2:0] s_axi_awprot;
output s_axi_awready;
input s_axi_wvalid;
input [31:0] s_axi_wdata;
input [ 3:0] s_axi_wstrb;
output s_axi_wready;
output s_axi_bvalid;
output [ 1:0] s_axi_bresp;
input s_axi_bready;
input s_axi_arvalid;
input [31:0] s_axi_araddr;
input [ 2:0] s_axi_arprot;
output s_axi_arready;
output s_axi_rvalid;
output [31:0] s_axi_rdata;
output [ 1:0] s_axi_rresp;
input s_axi_rready;
// gpio
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
input up_enable;
input up_txnrx;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
input [31:0] up_dac_gpio_in;
output [31:0] up_dac_gpio_out;
input [31:0] up_adc_gpio_in;
output [31:0] up_adc_gpio_out;
// chipscope signals
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
output [41:0] tdd_dbg;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// internal registers
reg up_wack = 'd0;
reg up_rack = 'd0;
reg [31:0] up_rdata = 'd0;
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
reg [15:0] adc_data_i0 = 16'b0;
reg [15:0] adc_data_q0 = 16'b0;
reg [15:0] adc_data_i1 = 16'b0;
reg [15:0] adc_data_q1 = 16'b0;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// internal clocks and resets
wire up_clk;
wire up_rstn;
wire delay_rst;
// internal signals
wire adc_ddr_edgesel;
wire adc_valid_s;
wire [47:0] adc_data_s;
wire adc_status_s;
wire dac_valid_s;
axi_ad9361: tx_valid must be controlled by the TDD controller
2016-02-12 12:33:34 +00:00
wire g_dac_valid_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
wire [47:0] dac_data_s;
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
wire dac_valid_i0_s;
wire dac_valid_q0_s;
wire dac_valid_i1_s;
wire dac_valid_q1_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
wire [ 6:0] up_adc_dld_s;
wire [34:0] up_adc_dwdata_s;
wire [34:0] up_adc_drdata_s;
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
wire [ 9:0] up_dac_dld_s;
wire [49:0] up_dac_dwdata_s;
wire [49:0] up_dac_drdata_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
wire delay_locked_s;
wire up_wreq_s;
wire [13:0] up_waddr_s;
wire [31:0] up_wdata_s;
wire up_wack_rx_s;
wire up_wack_tx_s;
wire up_rreq_s;
wire [13:0] up_raddr_s;
wire [31:0] up_rdata_rx_s;
wire up_rack_rx_s;
wire [31:0] up_rdata_tx_s;
wire up_rack_tx_s;
wire up_wack_tdd_s;
wire up_rack_tdd_s;
wire [31:0] up_rdata_tdd_s;
wire tdd_tx_dp_en_s;
wire tdd_rx_vco_en_s;
wire tdd_tx_vco_en_s;
wire tdd_rx_rf_en_s;
wire tdd_tx_rf_en_s;
wire [ 7:0] tdd_status_s;
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
wire tdd_enable_s;
wire tdd_txnrx_s;
wire tdd_mode_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
wire [15:0] adc_data_i0_s;
wire [15:0] adc_data_q0_s;
wire [15:0] adc_data_i1_s;
wire [15:0] adc_data_q1_s;
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// signal name changes
assign up_clk = s_axi_aclk;
assign up_rstn = s_axi_aresetn;
// processor read interface
always @(negedge up_rstn or posedge up_clk) begin
if (up_rstn == 0) begin
up_wack <= 'd0;
up_rack <= 'd0;
up_rdata <= 'd0;
end else begin
up_wack <= up_wack_rx_s | up_wack_tx_s | up_wack_tdd_s;
up_rack <= up_rack_rx_s | up_rack_tx_s | up_rack_tdd_s;
up_rdata <= up_rdata_rx_s | up_rdata_tx_s | up_rdata_tdd_s;
end
end
// device interface
axi_ad9361_dev_if #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.DEVICE_TYPE (DEVICE_TYPE),
.DAC_IODELAY_ENABLE (DAC_IODELAY_ENABLE),
.IO_DELAY_GROUP (IO_DELAY_GROUP))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_dev_if (
.rx_clk_in_p (rx_clk_in_p),
.rx_clk_in_n (rx_clk_in_n),
.rx_frame_in_p (rx_frame_in_p),
.rx_frame_in_n (rx_frame_in_n),
.rx_data_in_p (rx_data_in_p),
.rx_data_in_n (rx_data_in_n),
.tx_clk_out_p (tx_clk_out_p),
.tx_clk_out_n (tx_clk_out_n),
.tx_frame_out_p (tx_frame_out_p),
.tx_frame_out_n (tx_frame_out_n),
.tx_data_out_p (tx_data_out_p),
.tx_data_out_n (tx_data_out_n),
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
.enable (enable),
.txnrx (txnrx),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.rst (rst),
.clk (clk),
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
.l_clk (l_clk),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.adc_valid (adc_valid_s),
.adc_data (adc_data_s),
.adc_status (adc_status_s),
.adc_r1_mode (adc_r1_mode),
.adc_ddr_edgesel (adc_ddr_edgesel),
axi_ad9361: tx_valid must be controlled by the TDD controller
2016-02-12 12:33:34 +00:00
.dac_valid (g_dac_valid_s),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.dac_data (dac_data_s),
.dac_r1_mode (dac_r1_mode),
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
.tdd_enable (tdd_enable_s),
.tdd_txnrx (tdd_txnrx_s),
.tdd_mode (tdd_mode_s),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.up_clk (up_clk),
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
.up_enable (up_enable),
.up_txnrx (up_txnrx),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.up_adc_dld (up_adc_dld_s),
.up_adc_dwdata (up_adc_dwdata_s),
.up_adc_drdata (up_adc_drdata_s),
.up_dac_dld (up_dac_dld_s),
.up_dac_dwdata (up_dac_dwdata_s),
.up_dac_drdata (up_dac_drdata_s),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked_s));
// TDD interface
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
// additional flop to keep control and data synced
always @(posedge clk) begin
util_tdd_sync: Update the synchronization interface Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-10 10:43:16 +00:00
adc_data_i0 <= adc_data_i0_s;
adc_data_q0 <= adc_data_q0_s;
adc_data_i1 <= adc_data_i1_s;
adc_data_q1 <= adc_data_q1_s;
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
end
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
axi_ad9361_tdd_if #(.LEVEL_OR_PULSE_N(1)) i_tdd_if (
.clk (clk),
.rst (rst),
.tdd_rx_vco_en (tdd_rx_vco_en_s),
.tdd_tx_vco_en (tdd_tx_vco_en_s),
.tdd_rx_rf_en (tdd_rx_rf_en_s),
.tdd_tx_rf_en (tdd_tx_rf_en_s),
.ad9361_txnrx (tdd_txnrx_s),
.ad9361_enable (tdd_enable_s),
.ad9361_tdd_status (tdd_status_s));
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// TDD control
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
axi_ad9361_tdd i_tdd (
.clk (clk),
.rst (rst),
.tdd_rx_vco_en (tdd_rx_vco_en_s),
.tdd_tx_vco_en (tdd_tx_vco_en_s),
.tdd_rx_rf_en (tdd_rx_rf_en_s),
.tdd_tx_rf_en (tdd_tx_rf_en_s),
.tdd_enabled (tdd_mode_s),
.tdd_status (tdd_status_s),
axi_ad9361: Delete the old sync generator from the core + Define two control signal for util_tdd_sync : tdd_sync_en and tdd_terminal_type + Delete to old ad_tdd_sync.v instances from the core + Update Make files + Update ad_tdd_control: add additional CDC logic for tdd_sync (the sync comes from another clock domain) + Update the ad_tdd_sync module: it's just a simple pulse generator, the pulse period is defined using a parameter, pulse width is fixed: 128 x clock cycle + Update TDD regmap: tdd sync period is no longer software defined
2015-11-11 09:06:19 +00:00
.tdd_sync (tdd_sync),
util_tdd_sync: Update the synchronization interface Simplify the synchronization interface, there is one signal line between the synchronization module and transceiver core.
2016-02-10 10:43:16 +00:00
.tdd_sync_cntr (tdd_sync_cntr),
axi_ad9361: tx_valid must be controlled by the TDD controller
2016-02-12 12:33:34 +00:00
.tx_valid (dac_valid_s),
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
.tx_valid_i0 (dac_valid_i0_s),
.tx_valid_q0 (dac_valid_q0_s),
.tx_valid_i1 (dac_valid_i1_s),
.tx_valid_q1 (dac_valid_q1_s),
axi_ad9361: tx_valid must be controlled by the TDD controller
2016-02-12 12:33:34 +00:00
.tdd_tx_valid (g_dac_valid_s),
ad9361- ensm through dev-if
2015-08-27 15:14:36 +00:00
.tdd_tx_valid_i0 (dac_valid_i0),
.tdd_tx_valid_q0 (dac_valid_q0),
.tdd_tx_valid_i1 (dac_valid_i1),
.tdd_tx_valid_q1 (dac_valid_q1),
.rx_valid_i0 (adc_valid_i0_s),
.rx_valid_q0 (adc_valid_q0_s),
.rx_valid_i1 (adc_valid_i1_s),
.rx_valid_q1 (adc_valid_q1_s),
.tdd_rx_valid_i0 (adc_valid_i0),
.tdd_rx_valid_q0 (adc_valid_q0),
.tdd_rx_valid_i1 (adc_valid_i1),
.tdd_rx_valid_q1 (adc_valid_q1),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_tdd_s),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_tdd_s),
.up_rack (up_rack_tdd_s),
.tdd_dbg (tdd_dbg));
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
// receive
axi_ad9361_rx #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ID (ID),
.DATAPATH_DISABLE (ADC_DATAPATH_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_rx (
.adc_rst (rst),
.adc_clk (clk),
.adc_valid (adc_valid_s),
.adc_data (adc_data_s),
.adc_status (adc_status_s),
.adc_r1_mode (adc_r1_mode),
.adc_ddr_edgesel (adc_ddr_edgesel),
.dac_data (dac_data_s),
.up_dld (up_adc_dld_s),
.up_dwdata (up_adc_dwdata_s),
.up_drdata (up_adc_drdata_s),
.delay_clk (delay_clk),
.delay_rst (delay_rst),
.delay_locked (delay_locked_s),
.adc_enable_i0 (adc_enable_i0),
axi_ad9361/tdd: Add new control signals to the TDD data flow control logic Add tdd_gated_[tx/rx]_dmapath control bits to the TDD logic. With these control line, the user can choose between gated and free-running (like in FDD mode) data flow control.
2015-07-16 11:10:49 +00:00
.adc_valid_i0 (adc_valid_i0_s),
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
.adc_data_i0 (adc_data_i0_s),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.adc_enable_q0 (adc_enable_q0),
axi_ad9361/tdd: Add new control signals to the TDD data flow control logic Add tdd_gated_[tx/rx]_dmapath control bits to the TDD logic. With these control line, the user can choose between gated and free-running (like in FDD mode) data flow control.
2015-07-16 11:10:49 +00:00
.adc_valid_q0 (adc_valid_q0_s),
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
.adc_data_q0 (adc_data_q0_s),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.adc_enable_i1 (adc_enable_i1),
axi_ad9361/tdd: Add new control signals to the TDD data flow control logic Add tdd_gated_[tx/rx]_dmapath control bits to the TDD logic. With these control line, the user can choose between gated and free-running (like in FDD mode) data flow control.
2015-07-16 11:10:49 +00:00
.adc_valid_i1 (adc_valid_i1_s),
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
.adc_data_i1 (adc_data_i1_s),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.adc_enable_q1 (adc_enable_q1),
axi_ad9361/tdd: Add new control signals to the TDD data flow control logic Add tdd_gated_[tx/rx]_dmapath control bits to the TDD logic. With these control line, the user can choose between gated and free-running (like in FDD mode) data flow control.
2015-07-16 11:10:49 +00:00
.adc_valid_q1 (adc_valid_q1_s),
ad_tdd_control: Remove tdd_enable_synced control line For a better timing and control, the valid control lines are gated with flops, instead of combinatorial logic. This is the main reason why we do not need the tdd_enable_synced signal anymore. The out coming data is delayed by one clock cycle to keep data and control lines synced.
2015-12-03 09:13:56 +00:00
.adc_data_q1 (adc_data_q1_s),
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
.adc_dovf (adc_dovf),
.adc_dunf (adc_dunf),
.up_adc_gpio_in (up_adc_gpio_in),
.up_adc_gpio_out (up_adc_gpio_out),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_rx_s),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_rx_s),
.up_rack (up_rack_rx_s));
// transmit
axi_ad9361_tx #(
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
.ID (ID),
.DATAPATH_DISABLE (DAC_DATAPATH_DISABLE))
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
i_tx (
.dac_clk (clk),
.dac_valid (dac_valid_s),
.dac_data (dac_data_s),
.dac_r1_mode (dac_r1_mode),
.adc_data (adc_data_s),
.up_dld (up_dac_dld_s),
.up_dwdata (up_dac_dwdata_s),
.up_drdata (up_dac_drdata_s),
.delay_clk (delay_clk),
.delay_rst (),
.delay_locked (delay_locked_s),
.dac_sync_in (dac_sync_in),
.dac_sync_out (dac_sync_out),
.dac_enable_i0 (dac_enable_i0),
.dac_valid_i0 (dac_valid_i0_s),
.dac_data_i0 (dac_data_i0),
.dac_enable_q0 (dac_enable_q0),
.dac_valid_q0 (dac_valid_q0_s),
.dac_data_q0 (dac_data_q0),
.dac_enable_i1 (dac_enable_i1),
.dac_valid_i1 (dac_valid_i1_s),
.dac_data_i1 (dac_data_i1),
.dac_enable_q1 (dac_enable_q1),
.dac_valid_q1 (dac_valid_q1_s),
.dac_data_q1 (dac_data_q1),
.dac_dovf(dac_dovf),
.dac_dunf(dac_dunf),
.up_dac_gpio_in (up_dac_gpio_in),
.up_dac_gpio_out (up_dac_gpio_out),
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack_tx_s),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata_tx_s),
.up_rack (up_rack_tx_s));
// axi interface
up_axi i_up_axi (
.up_rstn (up_rstn),
.up_clk (up_clk),
.up_axi_awvalid (s_axi_awvalid),
.up_axi_awaddr (s_axi_awaddr),
.up_axi_awready (s_axi_awready),
.up_axi_wvalid (s_axi_wvalid),
.up_axi_wdata (s_axi_wdata),
.up_axi_wstrb (s_axi_wstrb),
.up_axi_wready (s_axi_wready),
.up_axi_bvalid (s_axi_bvalid),
.up_axi_bresp (s_axi_bresp),
.up_axi_bready (s_axi_bready),
.up_axi_arvalid (s_axi_arvalid),
.up_axi_araddr (s_axi_araddr),
.up_axi_arready (s_axi_arready),
.up_axi_rvalid (s_axi_rvalid),
.up_axi_rresp (s_axi_rresp),
.up_axi_rdata (s_axi_rdata),
.up_axi_rready (s_axi_rready),
.up_wreq (up_wreq_s),
.up_waddr (up_waddr_s),
.up_wdata (up_wdata_s),
.up_wack (up_wack),
.up_rreq (up_rreq_s),
.up_raddr (up_raddr_s),
.up_rdata (up_rdata),
.up_rack (up_rack));
endmodule
// ***************************************************************************
// ***************************************************************************