pluto_hdl_adi/library/util_cdc/sync_gray.v

// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// In this HDL repository, there are many different and unique modules, consisting
// of various HDL (Verilog or VHDL) components. The individual modules are
// developed independently, and may be accompanied by separate and unique license
// terms.
//
// The user should read each of these license terms, and understand the
// freedoms and responsibilities that he or she has by using this source/core.
//
// This core is distributed in the hope that it will be useful, but WITHOUT ANY
// WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR
// A PARTICULAR PURPOSE.
//
// Redistribution and use of source or resulting binaries, with or without modification
// of this file, are permitted under one of the following two license terms:
//
//   1. The GNU General Public License version 2 as published by the
//      Free Software Foundation, which can be found in the top level directory
//      of this repository (LICENSE_GPL2), and also online at:
//      <https://www.gnu.org/licenses/old-licenses/gpl-2.0.html>
//
// OR
//
//   2. An ADI specific BSD license, which can be found in the top level directory
//      of this repository (LICENSE_ADIBSD), and also on-line at:
//      https://github.com/analogdevicesinc/hdl/blob/master/LICENSE_ADIBSD
//      This will allow to generate bit files and not release the source code,
//      as long as it attaches to an ADI device.
//
// ***************************************************************************
// ***************************************************************************

/*
 * Helper module for synchronizing a counter from one clock domain to another
 * using gray code. To work correctly the counter must not change its value by
 * more than one in one clock cycle in the source domain. I.e. the value may
 * change by either -1, 0 or +1.
 */

`timescale 1ns/100ps

module sync_gray #(

  // Bit-width of the counter
  parameter DATA_WIDTH = 1,
  // Whether the input and output clock are asynchronous, if set to 0 the
  // synchronizer will be bypassed and out_count will be in_count.
  parameter ASYNC_CLK = 1)(

  input in_clk,
  input in_resetn,
  input [DATA_WIDTH-1:0] in_count,
  input out_resetn,
  input out_clk,
  output [DATA_WIDTH-1:0] out_count);

generate if (ASYNC_CLK == 1) begin
  reg [DATA_WIDTH-1:0] cdc_sync_stage0 = 'h0;
  reg [DATA_WIDTH-1:0] cdc_sync_stage1 = 'h0;
  reg [DATA_WIDTH-1:0] cdc_sync_stage2 = 'h0;
  reg [DATA_WIDTH-1:0] out_count_m = 'h0;

  function [DATA_WIDTH-1:0] g2b;
    input [DATA_WIDTH-1:0] g;
    reg   [DATA_WIDTH-1:0] b;
    integer i;
    begin
      b[DATA_WIDTH-1] = g[DATA_WIDTH-1];
      for (i = DATA_WIDTH - 2; i >= 0; i =  i - 1)
        b[i] = b[i + 1] ^ g[i];
      g2b = b;
    end
  endfunction

  function [DATA_WIDTH-1:0] b2g;
    input [DATA_WIDTH-1:0] b;
    reg [DATA_WIDTH-1:0] g;
    integer i;
    begin
      g[DATA_WIDTH-1] = b[DATA_WIDTH-1];
      for (i = DATA_WIDTH - 2; i >= 0; i = i -1)
          g[i] = b[i + 1] ^ b[i];
      b2g = g;
    end
  endfunction

  always @(posedge in_clk) begin
    if (in_resetn == 1'b0) begin
      cdc_sync_stage0 <= 'h00;
    end else begin
      cdc_sync_stage0 <= b2g(in_count);
    end
  end

  always @(posedge out_clk) begin
    if (out_resetn == 1'b0) begin
      cdc_sync_stage1 <= 'h00;
      cdc_sync_stage2 <= 'h00;
      out_count_m <= 'h00;
    end else begin
      cdc_sync_stage1 <= cdc_sync_stage0;
      cdc_sync_stage2 <= cdc_sync_stage1;
      out_count_m <= g2b(cdc_sync_stage2);
    end
  end

  assign out_count = out_count_m;
end else begin
  assign out_count = in_count;
end endgenerate

endmodule