pluto_hdl_adi/library/common/ad_gt_common.v

274 lines
8.3 KiB
Coq
Raw Normal View History

2015-08-03 12:38:00 +00:00
// ***************************************************************************
// ***************************************************************************
// Copyright 2014 - 2017 (c) Analog Devices, Inc. All rights reserved.
//
// Each core or library found in this collection may have its own licensing terms.
// The user should keep this in in mind while exploring these cores.
//
// Redistribution and use in source and binary forms,
// with or without modification of this file, are permitted under the terms of either
// (at the option of the user):
//
// 1. The GNU General Public License version 2 as published by the
// Free Software Foundation, which can be found in the top level directory, or at:
// https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html
//
// OR
//
// 2. An ADI specific BSD license as noted in the top level directory, or on-line at:
// https://github.com/analogdevicesinc/hdl/blob/dev/LICENSE
2015-08-03 12:38:00 +00:00
//
// ***************************************************************************
// ***************************************************************************
`timescale 1ns/1ps
module ad_gt_common #(
2015-08-03 12:38:00 +00:00
parameter integer GTH_OR_GTX_N = 0,
parameter integer QPLL_ENABLE = 1,
parameter integer QPLL_REFCLK_DIV = 2,
parameter [26:0] QPLL_CFG = 27'h06801C1,
parameter integer QPLL_FBDIV_RATIO = 1'b1,
parameter [ 9:0] QPLL_FBDIV = 10'b0000110000) (
2015-08-03 12:38:00 +00:00
// reset and clocks
input qpll_ref_clk_in,
input qpll_rst,
output qpll_clk,
output qpll_ref_clk,
output qpll_locked,
2015-08-03 12:38:00 +00:00
// drp interface
input up_clk,
input up_drp_sel,
input [11:0] up_drp_addr,
input up_drp_wr,
input [15:0] up_drp_wdata,
output [15:0] up_drp_rdata,
output up_drp_ready);
2015-08-03 12:38:00 +00:00
// instantiations
generate
if (QPLL_ENABLE == 0) begin
assign qpll_clk = 1'd0;
assign qpll_ref_clk = 1'd0;
assign qpll_locked = 1'd0;
assign up_drp_rdata = 16'd0;
assign up_drp_ready = 1'd0;
end
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
if ((QPLL_ENABLE == 1) && (GTH_OR_GTX_N == 0)) begin
2015-08-03 12:38:00 +00:00
GTXE2_COMMON #(
.SIM_RESET_SPEEDUP ("TRUE"),
.SIM_QPLLREFCLK_SEL (3'b001),
.SIM_VERSION ("3.0"),
.BIAS_CFG (64'h0000040000001000),
.COMMON_CFG (32'h00000000),
.QPLL_CFG (QPLL_CFG),
.QPLL_CLKOUT_CFG (4'b0000),
.QPLL_COARSE_FREQ_OVRD (6'b010000),
.QPLL_COARSE_FREQ_OVRD_EN (1'b0),
.QPLL_CP (10'b0000011111),
.QPLL_CP_MONITOR_EN (1'b0),
.QPLL_DMONITOR_SEL (1'b0),
.QPLL_FBDIV (QPLL_FBDIV),
.QPLL_FBDIV_MONITOR_EN (1'b0),
.QPLL_FBDIV_RATIO (QPLL_FBDIV_RATIO),
.QPLL_INIT_CFG (24'h000006),
.QPLL_LOCK_CFG (16'h21E8),
.QPLL_LPF (4'b1111),
.QPLL_REFCLK_DIV (QPLL_REFCLK_DIV))
i_gtxe2_common (
.DRPCLK (up_clk),
.DRPEN (up_drp_sel),
.DRPADDR (up_drp_addr[7:0]),
.DRPWE (up_drp_wr),
.DRPDI (up_drp_wdata),
.DRPDO (up_drp_rdata),
.DRPRDY (up_drp_ready),
.GTGREFCLK (1'd0),
.GTNORTHREFCLK0 (1'd0),
.GTNORTHREFCLK1 (1'd0),
.GTREFCLK0 (qpll_ref_clk_in),
.GTREFCLK1 (1'd0),
.GTSOUTHREFCLK0 (1'd0),
.GTSOUTHREFCLK1 (1'd0),
.QPLLDMONITOR (),
.QPLLOUTCLK (qpll_clk),
.QPLLOUTREFCLK (qpll_ref_clk),
.REFCLKOUTMONITOR (),
.QPLLFBCLKLOST (),
.QPLLLOCK (qpll_locked),
.QPLLLOCKDETCLK (up_clk),
.QPLLLOCKEN (1'd1),
.QPLLOUTRESET (1'd0),
.QPLLPD (1'd0),
.QPLLREFCLKLOST (),
.QPLLREFCLKSEL (3'b001),
.QPLLRESET (qpll_rst),
.QPLLRSVD1 (16'b0000000000000000),
.QPLLRSVD2 (5'b11111),
.BGBYPASSB (1'd1),
.BGMONITORENB (1'd1),
.BGPDB (1'd1),
.BGRCALOVRD (5'b00000),
.PMARSVD (8'b00000000),
.RCALENB (1'd1));
end
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
if ((QPLL_ENABLE == 1) && (GTH_OR_GTX_N == 1)) begin
2015-08-03 12:38:00 +00:00
GTHE3_COMMON #(
.SIM_RESET_SPEEDUP ("TRUE"),
.SIM_VERSION (2),
.SARC_EN (1'b1),
.SARC_SEL (1'b0),
.SDM0_DATA_PIN_SEL (1'b0),
.SDM0_WIDTH_PIN_SEL (1'b0),
.SDM1_DATA_PIN_SEL (1'b0),
.SDM1_WIDTH_PIN_SEL (1'b0),
.BIAS_CFG0 (16'b0000000000000000),
.BIAS_CFG1 (16'b0000000000000000),
.BIAS_CFG2 (16'b0000000000000000),
.BIAS_CFG3 (16'b0000000001000000),
.BIAS_CFG4 (16'b0000000000000000),
.COMMON_CFG0 (16'b0000000000000000),
.COMMON_CFG1 (16'b0000000000000000),
.POR_CFG (16'b0000000000000100),
.QPLL0_CFG0 (16'b0011000000011100),
.QPLL0_CFG1 (16'b0000000000011000),
.QPLL0_CFG1_G3 (16'b0000000000011000),
.QPLL0_CFG2 (16'b0000000001001000),
.QPLL0_CFG2_G3 (16'b0000000001001000),
.QPLL0_CFG3 (16'b0000000100100000),
.QPLL0_CFG4 (16'b0000000000001001),
.QPLL0_INIT_CFG0 (16'b0000000000000000),
.QPLL0_LOCK_CFG (16'b0010010111101000),
.QPLL0_LOCK_CFG_G3 (16'b0010010111101000),
.QPLL0_SDM_CFG0 (16'b0000000000000000),
.QPLL0_SDM_CFG1 (16'b0000000000000000),
.QPLL0_SDM_CFG2 (16'b0000000000000000),
.QPLL1_CFG0 (16'b0011000000011100),
.QPLL1_CFG1 (16'b0000000000011000),
.QPLL1_CFG1_G3 (16'b0000000000011000),
.QPLL1_CFG2 (16'b0000000001000000),
.QPLL1_CFG2_G3 (16'b0000000001000000),
.QPLL1_CFG3 (16'b0000000100100000),
.QPLL1_CFG4 (16'b0000000000001001),
.QPLL1_INIT_CFG0 (16'b0000000000000000),
.QPLL1_LOCK_CFG (16'b0010010111101000),
.QPLL1_LOCK_CFG_G3 (16'b0010010111101000),
.QPLL1_SDM_CFG0 (16'b0000000000000000),
.QPLL1_SDM_CFG1 (16'b0000000000000000),
.QPLL1_SDM_CFG2 (16'b0000000000000000),
.RSVD_ATTR0 (16'b0000000000000000),
.RSVD_ATTR1 (16'b0000000000000000),
.RSVD_ATTR2 (16'b0000000000000000),
.RSVD_ATTR3 (16'b0000000000000000),
.SDM0DATA1_0 (16'b0000000000000000),
.SDM0INITSEED0_0 (16'b0000000000000000),
.SDM1DATA1_0 (16'b0000000000000000),
.SDM1INITSEED0_0 (16'b0000000000000000),
.RXRECCLKOUT0_SEL (2'b00),
.RXRECCLKOUT1_SEL (2'b00),
.QPLL0_INIT_CFG1 (8'b00000000),
.QPLL1_INIT_CFG1 (8'b00000000),
.SDM0DATA1_1 (9'b000000000),
.SDM0INITSEED0_1 (9'b000000000),
.SDM1DATA1_1 (9'b000000000),
.SDM1INITSEED0_1 (9'b000000000),
.BIAS_CFG_RSVD (10'b0000000000),
.QPLL0_CP (10'b0000011111),
.QPLL0_CP_G3 (10'b1111111111),
.QPLL0_LPF (10'b1111111111),
.QPLL0_LPF_G3 (10'b0000010101),
.QPLL1_CP (10'b0000011111),
.QPLL1_CP_G3 (10'b1111111111),
.QPLL1_LPF (10'b1111111111),
.QPLL1_LPF_G3 (10'b0000010101),
.QPLL0_FBDIV (QPLL_FBDIV),
.QPLL0_FBDIV_G3 (80),
.QPLL0_REFCLK_DIV (QPLL_REFCLK_DIV),
.QPLL1_FBDIV (QPLL_FBDIV),
.QPLL1_FBDIV_G3 (80),
.QPLL1_REFCLK_DIV (QPLL_REFCLK_DIV))
i_gthe3_common (
.BGBYPASSB (1'd1),
.BGMONITORENB (1'd1),
.BGPDB (1'd1),
.BGRCALOVRD (5'b11111),
.BGRCALOVRDENB (1'd1),
.DRPADDR (up_drp_addr[8:0]),
.DRPCLK (up_clk),
.DRPDI (up_drp_wdata),
.DRPEN (up_drp_sel),
.DRPWE (up_drp_wr),
.GTGREFCLK0 (1'd0),
.GTGREFCLK1 (1'd0),
.GTNORTHREFCLK00 (1'd0),
.GTNORTHREFCLK01 (1'd0),
.GTNORTHREFCLK10 (1'd0),
.GTNORTHREFCLK11 (1'd0),
.GTREFCLK00 (qpll_ref_clk_in),
.GTREFCLK01 (1'd0),
.GTREFCLK10 (1'd0),
.GTREFCLK11 (1'd0),
.GTSOUTHREFCLK00 (1'd0),
.GTSOUTHREFCLK01 (1'd0),
.GTSOUTHREFCLK10 (1'd0),
.GTSOUTHREFCLK11 (1'd0),
.PMARSVD0 (8'd0),
.PMARSVD1 (8'd0),
.QPLLRSVD1 (8'd0),
.QPLLRSVD2 (5'd0),
.QPLLRSVD3 (5'd0),
.QPLLRSVD4 (8'd0),
.QPLL0CLKRSVD0 (1'd0),
.QPLL0CLKRSVD1 (1'd0),
.QPLL0LOCKDETCLK (up_clk),
.QPLL0LOCKEN (1'd1),
.QPLL0PD (1'd0),
.QPLL0REFCLKSEL (3'b001),
.QPLL0RESET (qpll_rst),
.QPLL1CLKRSVD0 (1'd0),
.QPLL1CLKRSVD1 (1'd0),
.QPLL1LOCKDETCLK (1'd0),
.QPLL1LOCKEN (1'd0),
.QPLL1PD (1'd1),
.QPLL1REFCLKSEL (3'b001),
.QPLL1RESET (1'd1),
.RCALENB (1'd1),
.DRPDO (up_drp_rdata),
.DRPRDY (up_drp_ready),
.PMARSVDOUT0 (),
.PMARSVDOUT1 (),
.QPLLDMONITOR0 (),
.QPLLDMONITOR1 (),
.QPLL0FBCLKLOST (),
.QPLL0LOCK (qpll_locked),
.QPLL0OUTCLK (qpll_clk),
.QPLL0OUTREFCLK (qpll_ref_clk),
.QPLL0REFCLKLOST (),
.QPLL1FBCLKLOST (),
.QPLL1LOCK (),
.QPLL1OUTCLK (),
.QPLL1OUTREFCLK (),
.QPLL1REFCLKLOST (),
.REFCLKOUTMONITOR0 (),
.REFCLKOUTMONITOR1 (),
.RXRECCLK0_SEL (),
.RXRECCLK1_SEL ());
end
endgenerate
endmodule
// ***************************************************************************
// ***************************************************************************