zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/daq3/kcu105/system_bd.tcl

29 lines
1018 B
Tcl
Raw Normal View History

adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs The affected projects are: - FMCADC2/VC707 - 16Mb - FMCADC5/VC707 - 16Mb - DAQ2/ZC706 - ADC@1GB and DAC@8Mb - DAQ2/KC705 - ADC@4Mb and DAC@4Mb - DAQ2/VC707 - ADC@8Mb and DAC@8Mb - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb - DAQ3/ZC706 - ADC@1GB and DAC@8Mb - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb - ADRV9371x/KCU105 - DAC@8Mb - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-10 07:34:45 +00:00
## FIFO depth is 4Mb - 250k samples
projects/system_bd- adc/dac fifo board designs
2017-02-27 21:05:21 +00:00
set adc_fifo_address_width 16
adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs The affected projects are: - FMCADC2/VC707 - 16Mb - FMCADC5/VC707 - 16Mb - DAQ2/ZC706 - ADC@1GB and DAC@8Mb - DAQ2/KC705 - ADC@4Mb and DAC@4Mb - DAQ2/VC707 - ADC@8Mb and DAC@8Mb - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb - DAQ3/ZC706 - ADC@1GB and DAC@8Mb - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb - ADRV9371x/KCU105 - DAC@8Mb - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-10 07:34:45 +00:00
## FIFO depth is 4Mb - 250k samples
set dac_fifo_address_width 15
projects/system_bd- adc/dac fifo board designs
2017-02-27 21:05:21 +00:00
adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs The affected projects are: - FMCADC2/VC707 - 16Mb - FMCADC5/VC707 - 16Mb - DAQ2/ZC706 - ADC@1GB and DAC@8Mb - DAQ2/KC705 - ADC@4Mb and DAC@4Mb - DAQ2/VC707 - ADC@8Mb and DAC@8Mb - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb - DAQ3/ZC706 - ADC@1GB and DAC@8Mb - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb - ADRV9371x/KCU105 - DAC@8Mb - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-10 07:34:45 +00:00
## NOTE: With this configuration the #36Kb BRAM utilization is at ~70%
daq3/kcu105: copy
2015-12-10 14:41:47 +00:00
source $ad_hdl_dir/projects/common/kcu105/kcu105_system_bd.tcl
file renamed; sed output; fingers crossed
2017-02-22 20:56:37 +00:00
source $ad_hdl_dir/projects/common/xilinx/adcfifo_bd.tcl
source $ad_hdl_dir/projects/common/xilinx/dacfifo_bd.tcl
daq3/kcu105: updates
2015-12-14 14:29:48 +00:00
source ../common/daq3_bd.tcl
sysid: Upgrade framework, header/ip are now at 2/1.1.a Unify tcl scripts; rename adi_pd_intel.tcl to adi_pd.tcl add git branch to internal use area; update log prints; update xilixn projects; fix cn0506 sysid script;
2020-10-09 14:28:10 +00:00
source $ad_hdl_dir/projects/scripts/adi_pd.tcl
daq3/kcu105: copy
2015-12-10 14:41:47 +00:00
Updated the makefiles to build the projects in subdirectories based on the build parameters. Running 'make' will build the default project directly in the project folder (like it did before) Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory. Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory. Running 'make clean' will clean the default project only. Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build. Running 'make clean-all' will delete all the built configurations and libraries. Note that the 'JESD' and 'LANE' words from the parameter names are stripped. Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-09-23 09:28:22 +00:00
set mem_init_sys_path [get_env_param ADI_PROJECT_DIR ""]mem_init_sys.txt;
system_id: deployed ip
2019-06-28 08:41:21 +00:00
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
Updated the makefiles to build the projects in subdirectories based on the build parameters. Running 'make' will build the default project directly in the project folder (like it did before) Running 'make RX_LANE_RATE=15 TX_LANE_RATE=15' will build the project inside the 'RXRATE15_TXRATE15' subdirectory. Running 'make CFG=cfg/test_config.txt" will use the variables found inside the configuration file and build the project inside the 'test_config' subdirectory. Running 'make clean' will clean the default project only. Running 'make CFG=cfg/test_config.txt clean' will clean the 'testconfig' build. Running 'make clean-all' will delete all the built configurations and libraries. Note that the 'JESD' and 'LANE' words from the parameter names are stripped. Signed-off-by: Bogdan Luncan <bogdan.luncan@analog.com>
2022-09-23 09:28:22 +00:00
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/$mem_init_sys_path"
system_id: deployed ip
2019-06-28 08:41:21 +00:00
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid: Remove cstring init string
2020-09-28 21:10:35 +00:00
sysid_gen_sys_init_file
system_id: deployed ip
2019-06-28 08:41:21 +00:00
daq3: Update IP instantiations
2017-04-21 12:07:41 +00:00
ad_ip_parameter util_daq3_xcvr CONFIG.QPLL_FBDIV 20
ad_ip_parameter util_daq3_xcvr CONFIG.QPLL_REFCLK_DIV 1
adrv9371/daq2/daq3:kcu105: patch GTH3 CPLL parameters Update GTH3 parameters according to a 10Gbps link from the Transceiver Wizard.
2019-02-01 08:38:00 +00:00
ad_ip_parameter util_daq3_xcvr CONFIG.CPLL_CFG0 0x67f8
ad_ip_parameter util_daq3_xcvr CONFIG.CPLL_CFG1 0xa4ac
ad_ip_parameter util_daq3_xcvr CONFIG.CPLL_CFG2 0x0007