zcy
/
pluto_hdl_adi
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
pluto_hdl_adi/projects/daq2/zc706/system_bd.tcl

21 lines
632 B
Tcl
Raw Normal View History

Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs The affected projects are: - FMCADC2/VC707 - 16Mb - FMCADC5/VC707 - 16Mb - DAQ2/ZC706 - ADC@1GB and DAC@8Mb - DAQ2/KC705 - ADC@4Mb and DAC@4Mb - DAQ2/VC707 - ADC@8Mb and DAC@8Mb - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb - DAQ3/ZC706 - ADC@1GB and DAC@8Mb - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb - ADRV9371x/KCU105 - DAC@8Mb - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-10 07:34:45 +00:00
## FIFO depth is 1GB, PL_DDR is used
projects/system_bd- adc/dac fifo board designs
2017-02-27 21:05:21 +00:00
set adc_fifo_address_width 16
adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs The affected projects are: - FMCADC2/VC707 - 16Mb - FMCADC5/VC707 - 16Mb - DAQ2/ZC706 - ADC@1GB and DAC@8Mb - DAQ2/KC705 - ADC@4Mb and DAC@4Mb - DAQ2/VC707 - ADC@8Mb and DAC@8Mb - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb - DAQ3/ZC706 - ADC@1GB and DAC@8Mb - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb - ADRV9371x/KCU105 - DAC@8Mb - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-10 07:34:45 +00:00
## FIFO depth is 8Mb - 500k samples
daq2: zc706: Increase DAC FIFO size Currently the DAC FIFO size for the ZC706 DAQ2 project is 16kB. This is quite a limiting size for practical applications. Increase the size to 1MB to allow loading larger waveforms. In this configuration the DAC FIFO will use half of the available BRAM cells in the FPGA. This still leaves quite a few BRAMs available for user application logic added to the design. If a user design should run out of BRAMs nevertheless they can reduce the FIFO size, if not required by the application, to free up some cells. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2017-04-28 09:29:12 +00:00
set dac_fifo_address_width 16
projects/system_bd- adc/dac fifo board designs
2017-02-27 21:05:21 +00:00
adc|dac_fifo: Maximize the depth of each instance of the internal RAM FIFOs The affected projects are: - FMCADC2/VC707 - 16Mb - FMCADC5/VC707 - 16Mb - DAQ2/ZC706 - ADC@1GB and DAC@8Mb - DAQ2/KC705 - ADC@4Mb and DAC@4Mb - DAQ2/VC707 - ADC@8Mb and DAC@8Mb - DAQ2/KCU105 - ADC@4Mb and DAC@4Mb - DAQ2/ZCU102 - ADC@8Mb and DAC@8Mb - DAQ3/ZC706 - ADC@1GB and DAC@8Mb - DAQ3/KCU105 - ADC@4Mb and DAC@4Mb - DAQ3/ZCU102 - ADC@8Mb and DAC@8Mb - ADRV9371x/KCU105 - DAC@8Mb - ADRV9371x/ZCU102 - DAC@16Mb
2018-08-10 07:34:45 +00:00
## NOTE: With this configuration the #36Kb BRAM utilization is at ~51%
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
source $ad_hdl_dir/projects/common/zc706/zc706_system_bd.tcl
file renamed; sed output; fingers crossed
2017-02-22 20:56:37 +00:00
source $ad_hdl_dir/projects/common/zc706/zc706_plddr3_adcfifo_bd.tcl
source $ad_hdl_dir/projects/common/xilinx/dacfifo_bd.tcl
Add .gitattributes file Add .gitattributes file which sets up the eol encoding handling. This will make sure that we get a uniform eol encoding across different operating systems. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
2015-06-26 09:04:19 +00:00
source ../common/daq2_bd.tcl
system_id: deployed ip
2019-06-28 08:41:21 +00:00
#system ID
ad_ip_parameter axi_sysid_0 CONFIG.ROM_ADDR_BITS 9
ad_ip_parameter rom_sys_0 CONFIG.PATH_TO_FILE "[pwd]/mem_init_sys.txt"
ad_ip_parameter rom_sys_0 CONFIG.ROM_ADDR_BITS 9
sysid: Remove cstring init string
2020-09-28 21:10:35 +00:00
sysid_gen_sys_init_file