pluto_hdl_adi/projects/fmcjesdadc1/common/fmcjesdadc1_bd.tcl

260 lines
13 KiB
Tcl
Raw Normal View History

# ad9250
create_bd_port -dir I rx_ref_clk
create_bd_port -dir O rx_sync
create_bd_port -dir O rx_sysref
create_bd_port -dir I -from 3 -to 0 rx_data_p
create_bd_port -dir I -from 3 -to 0 rx_data_n
create_bd_port -dir O -from 127 -to 0 rx_gt_data
create_bd_port -dir I -from 63 -to 0 rx_gt_data_0
create_bd_port -dir I -from 63 -to 0 rx_gt_data_1
create_bd_port -dir O adc_clk
create_bd_port -dir O adc_0_enable_a
create_bd_port -dir O adc_0_valid_a
create_bd_port -dir O -from 31 -to 0 adc_0_data_a
create_bd_port -dir O adc_0_enable_b
create_bd_port -dir O adc_0_valid_b
create_bd_port -dir O -from 31 -to 0 adc_0_data_b
create_bd_port -dir O adc_1_enable_a
create_bd_port -dir O adc_1_valid_a
create_bd_port -dir O -from 31 -to 0 adc_1_data_a
create_bd_port -dir O adc_1_enable_b
create_bd_port -dir O adc_1_valid_b
create_bd_port -dir O -from 31 -to 0 adc_1_data_b
create_bd_port -dir I dma_0_wr
create_bd_port -dir I dma_0_sync
create_bd_port -dir I -from 63 -to 0 dma_0_data
create_bd_port -dir I dma_1_wr
create_bd_port -dir I dma_1_sync
create_bd_port -dir I -from 63 -to 0 dma_1_data
# adc peripherals
set axi_ad9250_0_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9250:1.0 axi_ad9250_0_core]
set axi_ad9250_1_core [create_bd_cell -type ip -vlnv analog.com:user:axi_ad9250:1.0 axi_ad9250_1_core]
set axi_ad9250_jesd [create_bd_cell -type ip -vlnv xilinx.com:ip:jesd204:6.0 axi_ad9250_jesd]
set_property -dict [list CONFIG.C_NODE_IS_TRANSMIT {0}] $axi_ad9250_jesd
set_property -dict [list CONFIG.C_LANES {4}] $axi_ad9250_jesd
set axi_ad9250_gt [create_bd_cell -type ip -vlnv analog.com:user:axi_jesd_gt:1.0 axi_ad9250_gt]
set_property -dict [list CONFIG.PCORE_NUM_OF_RX_LANES {4}] $axi_ad9250_gt
set_property -dict [list CONFIG.PCORE_CPLL_FBDIV {2}] $axi_ad9250_gt
set_property -dict [list CONFIG.PCORE_RX_OUT_DIV {1}] $axi_ad9250_gt
set_property -dict [list CONFIG.PCORE_TX_OUT_DIV {1}] $axi_ad9250_gt
set_property -dict [list CONFIG.PCORE_RX_CLK25_DIV {10}] $axi_ad9250_gt
set_property -dict [list CONFIG.PCORE_TX_CLK25_DIV {10}] $axi_ad9250_gt
set_property -dict [list CONFIG.PCORE_PMA_RSV {0x00018480}] $axi_ad9250_gt
set_property -dict [list CONFIG.PCORE_RX_CDR_CFG {0x03000023ff20400020}] $axi_ad9250_gt
set axi_ad9250_0_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9250_0_dma]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.ID {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {1}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_LENGTH_WIDTH {24}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9250_0_dma
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CYCLIC {0}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_ad9250_0_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_ad9250_0_dma
set axi_ad9250_1_dma [create_bd_cell -type ip -vlnv analog.com:user:axi_dmac:1.0 axi_ad9250_1_dma]
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.DMA_TYPE_SRC {2}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_TYPE_DEST {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.ID {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.AXI_SLICE_SRC {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.AXI_SLICE_DEST {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.SYNC_TRANSFER_START {1}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_LENGTH_WIDTH {24}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_2D_TRANSFER {0}] $axi_ad9250_1_dma
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CYCLIC {0}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_SRC {64}] $axi_ad9250_1_dma
set_property -dict [list CONFIG.DMA_DATA_WIDTH_DEST {64}] $axi_ad9250_1_dma
# constants for avoiding errors when validating bd
set constant_1bit [create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 constant_1bit]
set_property -dict [list CONFIG.CONST_VAL {0}] $constant_1bit
set constant_4bit [create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 constant_4bit]
set_property -dict [list CONFIG.CONST_WIDTH {4}] $constant_4bit
set_property -dict [list CONFIG.CONST_VAL {0}] $constant_4bit
set constant_16bit [create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 constant_16bit]
set_property -dict [list CONFIG.CONST_WIDTH {16}] $constant_16bit
set_property -dict [list CONFIG.CONST_VAL {0}] $constant_16bit
set constant_128bit [create_bd_cell -type ip -vlnv xilinx.com:ip:xlconstant:1.1 constant_128bit]
set_property -dict [list CONFIG.CONST_WIDTH {128}] $constant_128bit
set_property -dict [list CONFIG.CONST_VAL {0}] $constant_128bit
# connections (gt)
ad_connect axi_ad9250_gt/ref_clk_c rx_ref_clk
ad_connect axi_ad9250_gt/rx_data_p rx_data_p
ad_connect axi_ad9250_gt/rx_data_n rx_data_n
ad_connect axi_ad9250_gt/rx_sync rx_sync
ad_connect axi_ad9250_gt/rx_sysref rx_sysref
# connections (adc)
ad_connect axi_ad9250_gt_rx_clk axi_ad9250_gt/rx_clk_g
ad_connect axi_ad9250_gt_rx_clk axi_ad9250_gt/rx_clk
ad_connect axi_ad9250_gt_rx_clk axi_ad9250_gt/tx_clk
ad_connect axi_ad9250_gt_rx_clk axi_ad9250_0_core/rx_clk
ad_connect axi_ad9250_gt_rx_clk axi_ad9250_1_core/rx_clk
ad_connect axi_ad9250_gt_rx_clk axi_ad9250_jesd/rx_core_clk
ad_connect axi_ad9250_gt_rx_clk adc_clk
ad_connect axi_ad9250_gt_rx_rst axi_ad9250_gt/rx_jesd_rst
ad_connect axi_ad9250_gt_rx_rst axi_ad9250_jesd/rx_reset
ad_connect axi_ad9250_gt_rx_sysref axi_ad9250_jesd/rx_sysref
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_charisk
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {4}] [get_bd_cells util_bsplit_rx_gt_charisk]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] [get_bd_cells util_bsplit_rx_gt_charisk]
ad_connect util_bsplit_rx_gt_charisk/data axi_ad9250_gt/rx_gt_charisk
ad_connect util_bsplit_rx_gt_charisk/split_data_0 axi_ad9250_jesd/gt0_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_1 axi_ad9250_jesd/gt1_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_2 axi_ad9250_jesd/gt2_rxcharisk
ad_connect util_bsplit_rx_gt_charisk/split_data_3 axi_ad9250_jesd/gt3_rxcharisk
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_disperr
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {4}] [get_bd_cells util_bsplit_rx_gt_disperr]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] [get_bd_cells util_bsplit_rx_gt_disperr]
ad_connect util_bsplit_rx_gt_disperr/data axi_ad9250_gt/rx_gt_disperr
ad_connect util_bsplit_rx_gt_disperr/split_data_0 axi_ad9250_jesd/gt0_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_1 axi_ad9250_jesd/gt1_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_2 axi_ad9250_jesd/gt2_rxdisperr
ad_connect util_bsplit_rx_gt_disperr/split_data_3 axi_ad9250_jesd/gt3_rxdisperr
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_notintable
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {4}] [get_bd_cells util_bsplit_rx_gt_notintable]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] [get_bd_cells util_bsplit_rx_gt_notintable]
ad_connect util_bsplit_rx_gt_notintable/data axi_ad9250_gt/rx_gt_notintable
ad_connect util_bsplit_rx_gt_notintable/split_data_0 axi_ad9250_jesd/gt0_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_1 axi_ad9250_jesd/gt1_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_2 axi_ad9250_jesd/gt2_rxnotintable
ad_connect util_bsplit_rx_gt_notintable/split_data_3 axi_ad9250_jesd/gt3_rxnotintable
create_bd_cell -type ip -vlnv analog.com:user:util_bsplit:1.0 util_bsplit_rx_gt_data
hdl/library: Update the IP parameters The following IP parameters were renamed: PCORE_ID --> ID PCORE_DEVTYPE --> DEVICE_TYPE PCORE_IODELAY_GROUP --> IO_DELAY_GROUP CH_DW --> CHANNEL_DATA_WIDTH CH_CNT --> NUM_OF_CHANNELS PCORE_BUFTYPE --> DEVICE_TYPE PCORE_ADC_DP_DISABLE --> ADC_DATAPATH_DISABLE CHID --> CHANNEL_ID PCORE_DEVICE_TYPE --> DEVICE_TYPE PCORE_MMCM_BUFIO_N --> MMCM_BUFIO_N PCORE_SERDES_DDR_N --> SERDES_DDR_N PCORE_DAC_DP_DISABLE --> DAC_DATAPATH_DISABLE DP_DISABLE --> DATAPATH_DISABLE PCORE_DAC_IODELAY_ENABLE --> DAC_IODELAY_ENABLE C_BIG_ENDIAN --> BIG_ENDIAN C_M_DATA_WIDTH --> MASTER_DATA_WIDTH C_S_DATA_WIDTH --> SLAVE_DATA_WIDTH NUM_CHANNELS --> NUM_OF_CHANNELS CHANNELS --> NUM_OF_CHANNELS PCORE_4L_2L_N -->QUAD_OR_DUAL_N C_ADDRESS_WIDTH --> ADDRESS_WIDTH C_DATA_WIDTH --> DATA_WIDTH C_CLKS_ASYNC --> CLKS_ASYNC PCORE_QUAD_DUAL_N --> QUAD_DUAL_N NUM_CS --> NUM_OF_CS PCORE_DAC_CHANNEL_ID --> DAC_CHANNEL_ID PCORE_ADC_CHANNEL_ID --> ADC_CHANNEL_ID PCORE_CLK0_DIV --> CLK0_DIV PCORE_CLK1_DIV --> CLK1_DIV PCORE_CLKIN_PERIOD --> CLKIN_PERIOD PCORE_VCO_DIV --> VCO_DIV PCORE_Cr_Cb_N --> CR_CB_N PCORE_VCO_MUL --> VCO_MUL PCORE_EMBEDDED_SYNC --> EMBEDDED_SYNC PCORE_AXI_ID_WIDTH --> AXI_ID_WIDTH PCORE_ADDR_WIDTH --> ADDRESS_WIDTH DADATA_WIDTH --> DATA_WIDTH NUM_OF_NUM_OF_CHANNEL --> NUM_OF_CHANNELS DEBOUNCER_LEN --> DEBOUNCER_LENGTH ADDR_WIDTH --> ADDRESS_WIDTH C_S_AXIS_REGISTERED --> S_AXIS_REGISTERED Cr_Cb_N --> CR_CB_N ADDATA_WIDTH --> ADC_DATA_WIDTH BUFTYPE --> DEVICE_TYPE NUM_BITS --> NUM_OF_BITS WIDTH_A --> A_DATA_WIDTH WIDTH_B --> B_DATA_WIDTH CH_OCNT --> NUM_OF_CHANNELS_O M_CNT --> NUM_OF_CHANNELS_M P_CNT --> NUM_OF_CHANNELS_P CH_ICNT --> NUM_OF_CHANNELS_I CH_MCNT --> NUM_OF_CHANNELS_M 4L_2L_N --> QUAD_OR_DUAL_N SPI_CLK_ASYNC --> ASYNC_SPI_CLK MMCM_BUFIO_N --> MMCM_OR_BUFIO_N SERDES_DDR_N --> SERDES_OR_DDR_N CLK_ASYNC --> ASYNC_CLK CLKS_ASYNC --> ASYNC_CLK SERDES --> SERDES_OR_DDR_N GTH_GTX_N --> GTH_OR_GTX_N IF_TYPE --> DDR_OR_SDR_N PARALLEL_WIDTH --> DATA_WIDTH ADD_SUB --> ADD_OR_SUB_N A_WIDTH --> A_DATA_WIDTH CONST_VALUE --> B_DATA_VALUE IO_BASEADDR --> BASE_ADDRESS IO_WIDTH --> DATA_WIDTH QUAD_DUAL_N --> QUAD_OR_DUAL_N AXI_ADDRLIMIT --> AXI_ADDRESS_LIMIT ADDRESS_A_DATA_WIDTH --> A_ADDRESS_WIDTH ADDRESS_B_DATA_WIDTH --> B_ADDRESS_WIDTH MODE_OF_ENABLE --> CONTROL_TYPE CONTROL_TYPE --> LEVEL_OR_PULSE_N IQSEL --> Q_OR_I_N MMCM --> MMCM_OR_BUFR_N
2015-08-19 11:11:47 +00:00
set_property -dict [list CONFIG.CHANNEL_DATA_WIDTH {32}] [get_bd_cells util_bsplit_rx_gt_data]
set_property -dict [list CONFIG.NUM_OF_CHANNELS {4}] [get_bd_cells util_bsplit_rx_gt_data]
ad_connect util_bsplit_rx_gt_data/data axi_ad9250_gt/rx_gt_data
ad_connect util_bsplit_rx_gt_data/split_data_0 axi_ad9250_jesd/gt0_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_1 axi_ad9250_jesd/gt1_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_2 axi_ad9250_jesd/gt2_rxdata
ad_connect util_bsplit_rx_gt_data/split_data_3 axi_ad9250_jesd/gt3_rxdata
ad_connect axi_ad9250_gt/rx_rst_done axi_ad9250_jesd/rx_reset_done
ad_connect axi_ad9250_gt/rx_ip_comma_align axi_ad9250_jesd/rxencommaalign_out
ad_connect axi_ad9250_gt/rx_ip_sync axi_ad9250_jesd/rx_sync
ad_connect axi_ad9250_gt/rx_ip_sof axi_ad9250_jesd/rx_start_of_frame
ad_connect axi_ad9250_gt/rx_ip_data axi_ad9250_jesd/rx_tdata
ad_connect axi_ad9250_gt/rx_data rx_gt_data
ad_connect axi_ad9250_0_core/rx_data rx_gt_data_0
ad_connect axi_ad9250_1_core/rx_data rx_gt_data_1
ad_connect axi_ad9250_0_core/adc_clk axi_ad9250_0_dma/fifo_wr_clk
ad_connect axi_ad9250_1_core/adc_clk axi_ad9250_1_dma/fifo_wr_clk
ad_connect adc_0_enable_a axi_ad9250_0_core/adc_enable_a
ad_connect adc_0_valid_a axi_ad9250_0_core/adc_valid_a
ad_connect adc_0_data_a axi_ad9250_0_core/adc_data_a
ad_connect adc_0_enable_b axi_ad9250_0_core/adc_enable_b
ad_connect adc_0_valid_b axi_ad9250_0_core/adc_valid_b
ad_connect adc_0_data_b axi_ad9250_0_core/adc_data_b
ad_connect adc_1_enable_a axi_ad9250_1_core/adc_enable_a
ad_connect adc_1_valid_a axi_ad9250_1_core/adc_valid_a
ad_connect adc_1_data_a axi_ad9250_1_core/adc_data_a
ad_connect adc_1_enable_b axi_ad9250_1_core/adc_enable_b
ad_connect adc_1_valid_b axi_ad9250_1_core/adc_valid_b
ad_connect adc_1_data_b axi_ad9250_1_core/adc_data_b
ad_connect axi_ad9250_0_dma/fifo_wr_en dma_0_wr
ad_connect axi_ad9250_0_dma/fifo_wr_sync dma_0_sync
ad_connect axi_ad9250_0_dma/fifo_wr_din dma_0_data
ad_connect axi_ad9250_1_dma/fifo_wr_en dma_1_wr
ad_connect axi_ad9250_1_dma/fifo_wr_sync dma_1_sync
ad_connect axi_ad9250_1_dma/fifo_wr_din dma_1_data
ad_connect axi_ad9250_0_core/adc_dovf axi_ad9250_0_dma/fifo_wr_overflow
ad_connect axi_ad9250_1_core/adc_dovf axi_ad9250_1_dma/fifo_wr_overflow
# ila
set ila_jesd_rx_mon [create_bd_cell -type ip -vlnv xilinx.com:ip:ila:5.0 ila_jesd_rx_mon]
set_property -dict [list CONFIG.C_MONITOR_TYPE {Native}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_NUM_OF_PROBES {11}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE0_WIDTH {334}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE1_WIDTH {6}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE2_WIDTH {128}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE3_WIDTH {32}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE4_WIDTH {32}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE5_WIDTH {32}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE6_WIDTH {32}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE7_WIDTH {1}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE8_WIDTH {1}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE9_WIDTH {1}] $ila_jesd_rx_mon
set_property -dict [list CONFIG.C_PROBE10_WIDTH {1}] $ila_jesd_rx_mon
ad_connect axi_ad9250_gt_rx_mon_data axi_ad9250_gt/rx_mon_data
ad_connect axi_ad9250_gt_rx_mon_trigger axi_ad9250_gt/rx_mon_trigger
ad_connect axi_ad9250_gt_rx_clk ila_jesd_rx_mon/CLK
ad_connect axi_ad9250_gt_rx_mon_data ila_jesd_rx_mon/PROBE0
ad_connect axi_ad9250_gt_rx_mon_trigger ila_jesd_rx_mon/PROBE1
ad_connect axi_ad9250_gt_rx_data ila_jesd_rx_mon/PROBE2
ad_connect axi_ad9250_0_core/adc_data_a ila_jesd_rx_mon/PROBE3
ad_connect axi_ad9250_0_core/adc_data_b ila_jesd_rx_mon/PROBE4
ad_connect axi_ad9250_1_core/adc_data_a ila_jesd_rx_mon/PROBE5
ad_connect axi_ad9250_1_core/adc_data_b ila_jesd_rx_mon/PROBE6
ad_connect axi_ad9250_0_core/adc_valid_a ila_jesd_rx_mon/PROBE7
ad_connect axi_ad9250_0_core/adc_valid_b ila_jesd_rx_mon/PROBE8
ad_connect axi_ad9250_1_core/adc_valid_a ila_jesd_rx_mon/PROBE9
ad_connect axi_ad9250_1_core/adc_valid_b ila_jesd_rx_mon/PROBE10
ad_connect constant_1bit/dout axi_ad9250_0_core/adc_dunf
ad_connect constant_1bit/dout axi_ad9250_1_core/adc_dunf
ad_connect constant_1bit/dout axi_ad9250_gt/ref_clk_q
ad_connect constant_1bit/dout axi_ad9250_gt/rx_ext_sysref
ad_connect constant_1bit/dout axi_ad9250_gt/tx_sync
ad_connect constant_1bit/dout axi_ad9250_gt/tx_ext_sysref
ad_connect constant_4bit/dout axi_ad9250_gt/tx_ip_sof
ad_connect constant_16bit/dout axi_ad9250_gt/tx_gt_charisk
ad_connect constant_128bit/dout axi_ad9250_gt/tx_data
ad_connect constant_128bit/dout axi_ad9250_gt/tx_gt_data
# interconnects
ad_cpu_interconnect 0x44A10000 axi_ad9250_0_core
ad_cpu_interconnect 0x44A20000 axi_ad9250_1_core
ad_cpu_interconnect 0x44A60000 axi_ad9250_gt
ad_cpu_interconnect 0x44A91000 axi_ad9250_jesd
ad_cpu_interconnect 0x7c420000 axi_ad9250_0_dma
ad_cpu_interconnect 0x7c430000 axi_ad9250_1_dma
ad_mem_hp2_interconnect sys_200m_clk sys_ps7/S_AXI_HP2
ad_mem_hp2_interconnect sys_200m_clk axi_ad9250_0_dma/m_dest_axi
ad_mem_hp2_interconnect sys_200m_clk axi_ad9250_1_dma/m_dest_axi
ad_connect sys_cpu_resetn axi_ad9250_0_dma/m_dest_axi_aresetn
ad_connect sys_cpu_resetn axi_ad9250_1_dma/m_dest_axi_aresetn
ad_mem_hp3_interconnect sys_cpu_clk sys_ps7/S_AXI_HP3
ad_mem_hp3_interconnect sys_cpu_clk axi_ad9250_gt/m_axi
#interrupts
ad_cpu_interrupt ps-13 mb-13 axi_ad9250_0_dma/irq
ad_cpu_interrupt ps-12 mb-12 axi_ad9250_1_dma/irq