107 lines
3.3 KiB
Matlab
107 lines
3.3 KiB
Matlab
function [CSX, port] = AddLumpedPort( CSX, prio, portnr, R, start, stop, dir, excite, varargin )
|
|
% [CSX, port] = AddLumpedPort( CSX, prio, portnr, R, start, stop, dir, excite, varargin )
|
|
%
|
|
% Add a 3D lumped port as an excitation.
|
|
%
|
|
% A lumped port consists of an excitation, a lumped resistor, a voltage and
|
|
% current probe.
|
|
%
|
|
% CSX: CSX-object created by InitCSX()
|
|
% prio: priority for substrate and probe boxes
|
|
% portnr: (integer) number of the port
|
|
% R: internal resistance of the port (lumped element)
|
|
% start: 3D start rowvector for port definition
|
|
% stop: 3D end rowvector for port definition
|
|
% dir: direction/amplitude of port (e.g.: [1 0 0], [0 1 0] or [0 0 1])
|
|
% excite (optional): if true, the port will be switched on (see AddExcitation())
|
|
% Note: for legacy support a string will be accepted
|
|
% varargin (optional): additional excitations options, see also AddExcitation
|
|
%
|
|
% example:
|
|
% start = [-0.1 -width/2 0];
|
|
% stop = [ 0.1 width/2 height];
|
|
% [CSX] = AddLumpedPort(CSX, 5 ,1 , 50, start, stop, [0 0 1], 'excite');
|
|
% this defines a lumped port in z-direction with a 50 Ohm port impedence
|
|
%
|
|
% openEMS matlab interface
|
|
% -----------------------
|
|
% Sebastian Held <sebastian.held@gmx.de>
|
|
% Jun 1 2010
|
|
% Thorsten Liebig
|
|
% Jul 13 2011
|
|
%
|
|
% See also InitCSX AddExcitation
|
|
|
|
% check dir
|
|
|
|
port.type='Lumped';
|
|
port.nr=portnr;
|
|
|
|
if (dir(1)~=0) && (dir(2) == 0) && (dir(3)==0)
|
|
n_dir = 1;
|
|
elseif (dir(1)==0) && (dir(2) ~= 0) && (dir(3)==0)
|
|
n_dir = 2;
|
|
elseif (dir(1)==0) && (dir(2) == 0) && (dir(3)~=0)
|
|
n_dir = 3;
|
|
else
|
|
error 'dir must have exactly one component ~= 0'
|
|
end
|
|
|
|
if (stop(n_dir)==start(n_dir))
|
|
error 'start/stop in excitation direction in must not be equal'
|
|
end
|
|
|
|
if (stop(n_dir)-start(n_dir)) > 0
|
|
direction = +1;
|
|
else
|
|
direction = -1;
|
|
end
|
|
port.direction = direction;
|
|
|
|
port.Feed_R = R;
|
|
if (R>0 && (~isinf(R)))
|
|
CSX = AddLumpedElement(CSX,['port_resist_' int2str(portnr)], n_dir-1, 'Caps', 1, 'R', R);
|
|
CSX = AddBox(CSX,['port_resist_' int2str(portnr)], prio, start, stop);
|
|
elseif (R<=0)
|
|
CSX = AddMetal(CSX,['port_resist_' int2str(portnr)]);
|
|
CSX = AddBox(CSX,['port_resist_' int2str(portnr)], prio, start, stop);
|
|
end
|
|
|
|
if (nargin < 8)
|
|
excite = false;
|
|
end
|
|
|
|
% legacy support, will be removed at some point
|
|
if ischar(excite)
|
|
warning('CSXCAD:AddLumpedPort','depreceated: a string as excite option is no longer supported and will be removed in the future, please use true or false');
|
|
if ~isempty(excite)
|
|
excite = true;
|
|
else
|
|
excite = false;
|
|
end
|
|
end
|
|
|
|
port.excite = excite;
|
|
% create excitation
|
|
if (excite)
|
|
CSX = AddExcitation( CSX, ['port_excite_' num2str(portnr)], 0, -dir*direction, varargin{:});
|
|
CSX = AddBox( CSX, ['port_excite_' num2str(portnr)], prio, start, stop );
|
|
end
|
|
|
|
u_start = 0.5*(start + stop);
|
|
u_stop = 0.5*(start + stop);
|
|
u_start(n_dir) = start(n_dir);
|
|
u_stop(n_dir) = stop(n_dir);
|
|
|
|
CSX = AddProbe(CSX,['port_ut' int2str(portnr)], 0, 'weight', -direction);
|
|
CSX = AddBox(CSX,['port_ut' int2str(portnr)], prio, u_start, u_stop);
|
|
|
|
i_start = start;
|
|
i_stop = stop;
|
|
i_start(n_dir) = 0.5*(start(n_dir)+stop(n_dir));
|
|
i_stop(n_dir) = 0.5*(start(n_dir)+stop(n_dir));
|
|
|
|
CSX = AddProbe(CSX,['port_it' int2str(portnr)], 1, 'weight', direction, 'NormDir', n_dir-1);
|
|
CSX = AddBox(CSX,['port_it' int2str(portnr)], prio, i_start, i_stop);
|
|
|