0f9f0fd830
fix: do not increase timestep to match periodic signal, only decreasing is ok!
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-09-03 21:25:49 +02:00
f06cc293dc
remove using namespace std from header files
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-06-18 21:45:22 +02:00
29ffbb66ab
cmake: improve build system and support win32
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-05-19 22:13:28 +02:00
cd1db5d21b
operator: new steady state detection operator extension
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2015-05-04 20:47:19 +02:00
63adb586fb
remove unused code from SSE compressed operator
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-27 23:09:11 +01:00
ac3dff8818
operator: speed improvement using a primitive pre-selection
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-19 21:59:39 +02:00
22d526f0ee
engine interface: improve interpolation for e-fields on boundary edges
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-09 21:08:11 +02:00
dae788a2a4
cmake: cleanup, build type for nf2ff
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-10-09 21:06:36 +02:00
480e6c430f
add CMake to openEMS
2014-09-18 21:12:50 +02:00
6da9213e62
initial support for vtk 6.x
...
run qmake with vtk-version given, e.g.:
qmake VTK_6_VERSION=6.1
or put this in localPaths.pri
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-29 14:51:00 +01:00
6f6ed4feac
critical fix: use new Operator->GetEngine for engine interface setup
...
Bug fix: engine interfaces for multigrids were using subgrid operator,
but main grid engine...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-06 16:08:13 +01:00
6353c70ae5
Operator: new method to get corresponding engine
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-06 15:40:39 +01:00
3d66de64d8
Engine interface: check for valid operator and engine
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2014-01-06 15:37:43 +01:00
3fc2a41af9
operator: change how to average material to allow for overloaded cylindrical handling
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-28 21:02:49 +01:00
87b6650f67
fix and improvemnt in getting cell center coordinate for material averaging
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-28 20:57:31 +01:00
dcf2e8c0cf
Operator: get access to cell center material averaging coordinates
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-20 15:48:04 +01:00
6a683d93d5
operator: add density as material type
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-20 15:47:28 +01:00
6892a0c589
support for multigrid level request of dump boxes
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-19 15:15:36 +01:00
2e8b2b7260
Added support for background material in CSXCAD
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-03 16:02:22 +01:00
3930db8be3
fix for curve in cylindrical coordinates and multigrids
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-12-03 16:02:21 +01:00
3a66a02550
fix in size of lumped elements caps
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-22 12:55:27 +02:00
e27e4057e1
operator: make Grid_Path a typedef struct
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-16 13:19:12 +02:00
6c80ad021d
pml: fix in material calculation
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-08-16 13:16:39 +02:00
37246be398
operator: additional fix to FindPath
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-06-10 10:13:58 +02:00
655cb7daed
operator: fix in handling curve primitives in cylindrical coordinates
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-06-05 14:56:34 +02:00
c65b5df785
typo: replace Operator_Ext_TFST with Operator_Ext_TFSF
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-04-12 16:07:39 +02:00
b8f1184071
remove old and unused split-field pml
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-04-12 14:26:26 +02:00
4c6294dfba
fix in conducting sheet extension, missing initialization
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-31 23:04:04 +02:00
8d8759cb1b
Operator: add optional range to DumpPEC2File to allow for separated dump in case of a multi grid cylindrical operator
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 12:02:08 +01:00
70ff8634f4
Cylindrical MultiGrid Operator: record level of multi grid
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 12:00:46 +01:00
816553fc34
Operator: allow to choose time stepping method
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 11:58:24 +01:00
6016a10fc2
Operator: use internal function to delete inactive extensions
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 11:55:39 +01:00
bd0df58253
bug fix: operator extensions copy constructor is missing copy for active flag
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-27 11:54:16 +01:00
e113afb656
new: support debye dispersive material
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-19 14:02:06 +01:00
57dfd64c9b
added support for Lorentz dispersive material
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-03-14 16:52:44 +01:00
8d5043bd44
operator: alternative material averaging method
...
If constant cell material is activated, material probing is performed
only in the center of a primary cell.
This should improve and simplify SAR calculation if all materials
are assumed as constant within a primary YEE cell.
Usage from Matlab/Octave:
FDTD = InitFDTD('CellConstantMaterial',1);
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-02-18 10:38:55 +01:00
274800054f
silence some warnings
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-02-07 11:25:34 +01:00
5da669d881
new method to debug metal edges using vtkPolyData lines
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-02-06 16:42:03 +01:00
b3ef0361b2
Operator: Get node coordinates in the given coordinate system
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-02-06 16:40:32 +01:00
183ea9f776
Operator: replacement for GetOriginalNumLines + use full or simple mesh for snapping
...
Note: these are a lot and dangerous changes --> require a lot of testing
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2013-02-06 16:33:12 +01:00
e6c0444985
CSXCAD: match recent version with split files for primitives and properties
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-12-03 13:59:39 +01:00
0cdc26eba2
cylindrical operator: improve mesh snapping for angular directions
2012-11-21 16:41:53 +01:00
3dba30c240
regression fix
...
regression fix introduced by 013f92ba26
2012-11-21 16:18:06 +01:00
fb542df1c3
fixed warning about comparison between signed and unsigned
...
Proposed change:
Operator::SetBCSize() and Operator::GetBCSize() should have unsigned sizes.
2012-11-15 22:10:42 +01:00
013f92ba26
fixed some warnings of gcc-4.7
2012-11-15 21:44:43 +01:00
d64e43a73c
run post processing after final time evaluation
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-11-06 12:46:54 +01:00
211e7170e4
critical bug fix: access after delete
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-10-29 14:51:02 +01:00
42f0a6dc59
linux compile fix
...
Forgot to add a header.
2012-10-06 21:10:23 +02:00
384cfe5677
bugfix Windows: FTZ and DAZ bits in SSE computation unit is thread dependent.
...
This fix sets the FTZ ans DAZ bits in every thread to gain the speedup.
Linux seems to store these bits per process rather than per thread.
2012-10-06 20:50:36 +02:00
0022996df6
FDTD: new argument to reduce the used timestep by a given factor
...
Signed-off-by: Thorsten Liebig <Thorsten.Liebig@gmx.de>
2012-09-27 14:20:20 +02:00
Thorsten Liebig
Guilherme Brondani Torri
Sebastian Held