339 lines
14 KiB
Matlab
339 lines
14 KiB
Matlab
% Copyright 2014(c) Analog Devices, Inc.
|
|
%
|
|
% All rights reserved.
|
|
%
|
|
% Redistribution and use in source and binary forms, with or without modification,
|
|
% are permitted provided that the following conditions are met:
|
|
% - Redistributions of source code must retain the above copyright
|
|
% notice, this list of conditions and the following disclaimer.
|
|
% - Redistributions in binary form must reproduce the above copyright
|
|
% notice, this list of conditions and the following disclaimer in
|
|
% the documentation and/or other materials provided with the
|
|
% distribution.
|
|
% - Neither the name of Analog Devices, Inc. nor the names of its
|
|
% contributors may be used to endorse or promote products derived
|
|
% from this software without specific prior written permission.
|
|
% - The use of this software may or may not infringe the patent rights
|
|
% of one or more patent holders. This license does not release you
|
|
% from the requirement that you obtain separate licenses from these
|
|
% patent holders to use this software.
|
|
% - Use of the software either in source or binary form or filter designs
|
|
% resulting from the use of this software, must be connected to, run
|
|
% on or loaded to an Analog Devices Inc. component.
|
|
%
|
|
% THIS SOFTWARE IS PROVIDED BY ANALOG DEVICES "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
|
|
% INCLUDING, BUT NOT LIMITED TO, NON-INFRINGEMENT, MERCHANTABILITY AND FITNESS FOR A
|
|
% PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
%
|
|
% IN NO EVENT SHALL ANALOG DEVICES BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
|
|
% EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, INTELLECTUAL PROPERTY
|
|
% RIGHTS, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
|
|
% BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
|
|
% STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF
|
|
% THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
classdef iio_sys_obj_matlab
|
|
% iio_sys_obj System Object block for IIO devices
|
|
|
|
properties (Access = public)
|
|
% Public, non-tunable properties.
|
|
|
|
%ip_address IP address
|
|
ip_address = '';
|
|
|
|
%dev_name Device name
|
|
dev_name = '';
|
|
|
|
%in_ch_no Number of input data channels
|
|
in_ch_no = 0;
|
|
|
|
%in_ch_size Input data channel size [samples]
|
|
in_ch_size = 8192;
|
|
|
|
%out_ch_no Number of output data channels
|
|
out_ch_no = 0;
|
|
|
|
%out_ch_size Output data channel size [samples]
|
|
out_ch_size = 8192;
|
|
end
|
|
|
|
properties (Access = public)
|
|
% Protected class properties.
|
|
|
|
%iio_dev_cfg Device configuration structure
|
|
iio_dev_cfg = [];
|
|
end
|
|
|
|
properties (Access = private)
|
|
% Private class properties.
|
|
|
|
%libiio_data_in_dev libiio IIO interface object for the input data device
|
|
libiio_data_in_dev = {};
|
|
|
|
%libiio_data_out_dev libiio IIO interface object for the output data device
|
|
libiio_data_out_dev = {};
|
|
|
|
%libiio_ctrl_dev libiio IIO interface object for the control device
|
|
libiio_ctrl_dev = {};
|
|
|
|
%sys_obj_initialized Holds the initialization status of the system object
|
|
sys_obj_initialized = 0;
|
|
end
|
|
|
|
properties (Access = private)
|
|
% Discrete state properties.
|
|
|
|
%num_cfg_in Numeric type input control channels data
|
|
num_cfg_in;
|
|
|
|
%str_cfg_in String type input control channels data
|
|
str_cfg_in;
|
|
end
|
|
|
|
methods
|
|
%% Constructor
|
|
function obj = iio_sys_obj_matlab(varargin)
|
|
% Construct the libiio interface objects
|
|
obj.libiio_data_in_dev = libiio_if();
|
|
obj.libiio_data_out_dev = libiio_if();
|
|
obj.libiio_ctrl_dev = libiio_if();
|
|
end
|
|
end
|
|
|
|
methods (Access = protected)
|
|
%% Utility functions
|
|
|
|
function config = getObjConfig(obj)
|
|
% Read the selected device configuration
|
|
|
|
% Open the configuration file
|
|
fname = sprintf('%s.cfg', obj.dev_name);
|
|
fp_cfg = fopen(fname);
|
|
if(fp_cfg < 0)
|
|
config = {};
|
|
return;
|
|
end
|
|
|
|
% Build the object configuration structure
|
|
config = struct('data_in_device', '',... % Pointer to the data input device
|
|
'data_out_device', '',... % Pointer to the data output device
|
|
'ctrl_device', '',... % Pointer to the control device
|
|
'cfg_ch', [],... % Configuration channels list
|
|
'mon_ch', [],... % Monitoring channels list
|
|
'in_ch_names', [],... % Configuration channels names
|
|
'out_ch_names', []); % Monitoring channels names
|
|
config.in_ch_names = {};
|
|
config.out_ch_names = {};
|
|
|
|
% Build the configuration/monitoring channels structure
|
|
ch_cfg = struct('port_name', '',... % Name of the port to be displayed on the object block
|
|
'port_attr', '',... % Associated device attribute name
|
|
'ctrl_dev_name', '',... % Control device name
|
|
'ctrl_dev', 0); % Pointer to the control device object
|
|
|
|
% Read the object's configuration
|
|
while(~feof(fp_cfg))
|
|
line = fgets(fp_cfg);
|
|
if(strfind(line,'#'))
|
|
continue;
|
|
end
|
|
if(~isempty(strfind(line, 'channel')))
|
|
% Get the associated configuration/monitoring channels
|
|
idx = strfind(line, '=');
|
|
line = line(idx+1:end);
|
|
line = strsplit(line, ',');
|
|
ch_cfg.port_name = strtrim(line{1});
|
|
ch_cfg.port_attr = strtrim(line{3});
|
|
if(length(line) > 4)
|
|
ch_cfg.ctrl_dev_name = strtrim(line{4});
|
|
else
|
|
ch_cfg.ctrl_dev_name = 'ctrl_device';
|
|
end
|
|
if(strcmp(strtrim(line{2}), 'IN'))
|
|
config.cfg_ch = [config.cfg_ch ch_cfg];
|
|
config.in_ch_names = [config.in_ch_names ch_cfg.port_name];
|
|
elseif(strcmp(strtrim(line{2}), 'OUT'))
|
|
config.mon_ch = [config.mon_ch ch_cfg];
|
|
config.out_ch_names = [config.out_ch_names ch_cfg.port_name];
|
|
end
|
|
elseif(~isempty(strfind(line, 'data_in_device')))
|
|
% Get the associated data input device
|
|
idx = strfind(line, '=');
|
|
tmp = line(idx+1:end);
|
|
tmp = strtrim(tmp);
|
|
config.data_in_device = tmp;
|
|
elseif(~isempty(strfind(line, 'data_out_device')))
|
|
% Get the associated data output device
|
|
idx = strfind(line, '=');
|
|
tmp = line(idx+1:end);
|
|
tmp = strtrim(tmp);
|
|
config.data_out_device = tmp;
|
|
elseif(~isempty(strfind(line, 'ctrl_device')))
|
|
% Get the associated control device
|
|
idx = strfind(line, '=');
|
|
tmp = line(idx+1:end);
|
|
tmp = strtrim(tmp);
|
|
config.ctrl_device = tmp;
|
|
end
|
|
end
|
|
fclose(fp_cfg);
|
|
end
|
|
|
|
end
|
|
|
|
methods (Access = public)
|
|
%% Helper functions
|
|
function ret = getInChannel(obj, channelName)
|
|
% Returns the index of a named input channel
|
|
ret = obj.in_ch_no + find(strcmp(obj.iio_dev_cfg.in_ch_names, channelName));
|
|
end
|
|
|
|
function ret = getOutChannel(obj, channelName)
|
|
% Returns the index of a named output channel
|
|
ret = obj.out_ch_no + find(strcmp(obj.iio_dev_cfg.out_ch_names, channelName));
|
|
end
|
|
|
|
%% Common functions
|
|
function ret = setupImpl(obj)
|
|
% Implement tasks that need to be performed only once.
|
|
|
|
% Set the initialization status to fail
|
|
obj.sys_obj_initialized = 0;
|
|
|
|
% Read the object's configuration from the associated configuration file
|
|
obj.iio_dev_cfg = getObjConfig(obj);
|
|
if(isempty(obj.iio_dev_cfg))
|
|
msgbox('Could not read device configuration!', 'Error','error');
|
|
return;
|
|
end
|
|
|
|
% Initialize discrete-state properties.
|
|
obj.num_cfg_in = zeros(1, length(obj.iio_dev_cfg.cfg_ch));
|
|
obj.str_cfg_in = zeros(length(obj.iio_dev_cfg.cfg_ch), 64);
|
|
|
|
% Initialize the libiio data input device
|
|
if(obj.in_ch_no ~= 0)
|
|
[ret, err_msg, msg_log] = init(obj.libiio_data_in_dev, obj.ip_address, ...
|
|
obj.iio_dev_cfg.data_in_device, 'OUT', ...
|
|
obj.in_ch_no, obj.in_ch_size);
|
|
fprintf('%s', msg_log);
|
|
if(ret < 0)
|
|
msgbox(err_msg, 'Error','error');
|
|
return;
|
|
end
|
|
end
|
|
|
|
% Initialize the libiio data output device
|
|
if(obj.out_ch_no ~= 0)
|
|
[ret, err_msg, msg_log] = init(obj.libiio_data_out_dev, obj.ip_address, ...
|
|
obj.iio_dev_cfg.data_out_device, 'IN', ...
|
|
obj.out_ch_no, obj.out_ch_size);
|
|
fprintf('%s', msg_log);
|
|
if(ret < 0)
|
|
msgbox(err_msg, 'Error','error');
|
|
return;
|
|
end
|
|
end
|
|
|
|
% Initialize the libiio control device
|
|
if(~isempty(obj.iio_dev_cfg.ctrl_device))
|
|
[ret, err_msg, msg_log] = init(obj.libiio_ctrl_dev, obj.ip_address, ...
|
|
obj.iio_dev_cfg.ctrl_device, '', ...
|
|
0, 0);
|
|
fprintf('%s', msg_log);
|
|
if(ret < 0)
|
|
msgbox(err_msg, 'Error','error');
|
|
return;
|
|
end
|
|
end
|
|
|
|
% Assign the control device for each monitoring channel
|
|
for i = 1 : length(obj.iio_dev_cfg.mon_ch)
|
|
if(strcmp(obj.iio_dev_cfg.mon_ch(i).ctrl_dev_name, 'data_in_device'))
|
|
obj.iio_dev_cfg.mon_ch(i).ctrl_dev = obj.libiio_data_in_dev;
|
|
elseif(strcmp(obj.iio_dev_cfg.mon_ch(i).ctrl_dev_name, 'data_out_device'))
|
|
obj.iio_dev_cfg.mon_ch(i).ctrl_dev = obj.libiio_data_out_dev;
|
|
else
|
|
obj.iio_dev_cfg.mon_ch(i).ctrl_dev = obj.libiio_ctrl_dev;
|
|
end
|
|
end
|
|
|
|
% Assign the control device for each configuration channel
|
|
for i = 1 : length(obj.iio_dev_cfg.cfg_ch)
|
|
if(strcmp(obj.iio_dev_cfg.cfg_ch(i).ctrl_dev_name, 'data_in_device'))
|
|
obj.iio_dev_cfg.cfg_ch(i).ctrl_dev = obj.libiio_data_in_dev;
|
|
elseif(strcmp(obj.iio_dev_cfg.cfg_ch(i).ctrl_dev_name, 'data_out_device'))
|
|
obj.iio_dev_cfg.cfg_ch(i).ctrl_dev = obj.libiio_data_out_dev;
|
|
else
|
|
obj.iio_dev_cfg.cfg_ch(i).ctrl_dev = obj.libiio_ctrl_dev;
|
|
end
|
|
end
|
|
|
|
% Set the initialization status to success
|
|
obj.sys_obj_initialized = 1;
|
|
ret = obj;
|
|
end
|
|
|
|
function releaseImpl(obj)
|
|
% Release any resources used by the system object.
|
|
obj.iio_dev_cfg = {};
|
|
delete(obj.libiio_data_in_dev);
|
|
delete(obj.libiio_data_out_dev);
|
|
delete(obj.libiio_ctrl_dev);
|
|
end
|
|
|
|
function ret = stepImpl(obj, varargin)
|
|
% Implement the system object's processing flow.
|
|
varargout = cell(1, obj.out_ch_no + length(obj.iio_dev_cfg.mon_ch));
|
|
if(obj.sys_obj_initialized == 0)
|
|
return;
|
|
end
|
|
|
|
% Implement the device configuration flow
|
|
for i = 1 : length(obj.iio_dev_cfg.cfg_ch)
|
|
if(~isempty(varargin{1}{i + obj.in_ch_no}))
|
|
if(length(varargin{1}{i + obj.in_ch_no}) == 1)
|
|
new_data = (varargin{1}{i + obj.in_ch_no} ~= obj.num_cfg_in(i));
|
|
else
|
|
new_data = ~strncmp(char(varargin{1}{i + obj.in_ch_no}'), char(obj.str_cfg_in(i,:)), length(varargin{1}{i + obj.in_ch_no}));
|
|
end
|
|
if(new_data == 1)
|
|
if(length(varargin{1}{i + obj.in_ch_no}) == 1)
|
|
obj.num_cfg_in(i) = varargin{1}{i + obj.in_ch_no};
|
|
str = num2str(obj.num_cfg_in(i));
|
|
else
|
|
for j = 1:length(varargin{1}{i + obj.in_ch_no})
|
|
obj.str_cfg_in(i,j) = varargin{1}{i + obj.in_ch_no}(j);
|
|
end
|
|
obj.str_cfg_in(i,j+1) = 0;
|
|
str = char(obj.str_cfg_in(i,:));
|
|
end
|
|
writeAttributeString(obj.iio_dev_cfg.cfg_ch(i).ctrl_dev, obj.iio_dev_cfg.cfg_ch(i).port_attr, str);
|
|
end
|
|
end
|
|
end
|
|
|
|
% Implement the data transmit flow
|
|
writeData(obj.libiio_data_in_dev, varargin{1});
|
|
|
|
% Implement the data capture flow
|
|
[~, data] = readData(obj.libiio_data_out_dev);
|
|
for i = 1 : obj.out_ch_no
|
|
varargout{i} = data{i};
|
|
end
|
|
|
|
% Implement the parameters monitoring flow
|
|
for i = 1 : length(obj.iio_dev_cfg.mon_ch)
|
|
[~, val] = readAttributeDouble(obj.iio_dev_cfg.mon_ch(i).ctrl_dev, obj.iio_dev_cfg.mon_ch(i).port_attr);
|
|
varargout{obj.out_ch_no + i} = val;
|
|
end
|
|
|
|
ret=varargout;
|
|
end
|
|
|
|
function ret = writeFirData(obj, fir_data_file)
|
|
fir_data_str = fileread(fir_data_file);
|
|
ret = writeAttributeString(obj.libiio_ctrl_dev, 'filter_fir_config', fir_data_str);
|
|
end
|
|
end
|
|
end |