update arduino/Betas/RGB_V1.5/main/main.ino.
慕炎
Gitee
parent
5d71101d50
commit
7827234a25
|
|
@ -1,5 +1,5 @@
|
|||
/**
|
||||
自平衡莱洛三角形 RGB版 HW:Ver 1.5 FW:Ver 1.1.1
|
||||
自平衡莱洛三角形 RGB版 HW:Ver 1.5 FW:Ver 1.2.1
|
||||
立创EDA https://oshwhub.com/muyan2020/zi-ping-heng-di-lai-luo-san-jiao_10-10-ban-ben_copy
|
||||
RGB版本程序 https://gitee.com/muyan3000/RGBFOC 基于45°(https://gitee.com/coll45/foc/)程序修改
|
||||
arduino开发环境-灯哥开源FOChttps://gitee.com/ream_d/Deng-s-foc-controller，并安装Kalman。
|
||||
|
|
@ -11,7 +11,8 @@
|
|||
比如让平衡角度为90度，则输入：TA90，并且会存入eeprom的位置0中 注：wifi发送命令不能过快，因为每次都会保存进eeprom
|
||||
在使用自己的电机时，请一定记得修改默认极对数，即 BLDCMotor(5) 中的值，设置为自己的极对数数字，磁铁数量/2
|
||||
程序默认设置的供电电压为 12V,用其他电压供电请记得修改 voltage_power_supply , voltage_limit 变量中的值
|
||||
默认PID针对的电机是 GB2204 ，使用自己的电机需要修改PID参数，才能实现更好效果
|
||||
V1默认PID针对的电机是 GB2204 ，使用自己的电机需要修改PID参数，才能实现更好效果
|
||||
V2电机是2715
|
||||
*/
|
||||
#include <SimpleFOC.h>
|
||||
#include "Command.h"
|
||||
|
|
@ -59,7 +60,7 @@ int touchDetected[4] = {}; //通过touchdetected持续计数判断是否按键
|
|||
bool touch_touched[4] = {}; //单击判断
|
||||
int touch_touched_times[4] = {}; //单击次数，单击切换模式，双击
|
||||
int touch_touching_time[4] = {}; //持续触摸秒数，用于判断长按事件，长按关闭，长按开启，开启状态长按调光，
|
||||
bool touch_STATE[4] = {1, 1, 1, 1}; // 定义按键触发对象状态变量初始值为true默认开启
|
||||
bool touch_STATE[4] = {1, 1, 1, 1}; // 定义按键触发对象状态变量初始值为true默认开启 T2 T3 T4
|
||||
|
||||
const char *username = "admin"; //web用户名
|
||||
const char *userpassword = "reuleaux123"; //web用户密码
|
||||
|
|
@ -119,17 +120,17 @@ float LQR_K4_2 = 1.5; //
|
|||
float LQR_K4_3 = 1.42; //
|
||||
|
||||
//电机参数
|
||||
BLDCMotor motor = BLDCMotor(5);
|
||||
BLDCMotor motor = BLDCMotor(5); //电机极数
|
||||
BLDCDriver3PWM driver = BLDCDriver3PWM(32, 33, 25, 22);
|
||||
float target_velocity = 0; //目标速度
|
||||
float target_angle = 90; //平衡角度 例如TA89.3 设置平衡角度89.3
|
||||
float target_angle = 89.3; //平衡角度 例如TA89.3 设置平衡角度89.3
|
||||
float target_voltage = 0; //目标电压
|
||||
float swing_up_voltage = 1.8; //摇摆电压 左右摇摆的电压，越大越快到平衡态，但是过大会翻过头
|
||||
float swing_up_angle = 20; //摇摆角度 离平衡角度还有几度时候，切换到自平衡控制
|
||||
float v_i_1 = 20; //非稳态速度环I
|
||||
float v_p_1 = 0.7; //非稳态速度环P
|
||||
float v_p_1 = 0.5; //非稳态速度环P
|
||||
float v_i_2 = 10; //稳态速度环I
|
||||
float v_p_2 = 0.3; //稳态速度环P
|
||||
float v_p_2 = 0.2; //稳态速度环P
|
||||
//命令设置
|
||||
Command comm;
|
||||
bool Motor_enable_flag = 0;
|
||||
|
|
@ -227,6 +228,61 @@ void Debug_Log_func(String debuglog, bool debug_control = debug_log_control) {
|
|||
}
|
||||
}
|
||||
|
||||
bool AutoWifiConfig()
|
||||
{
|
||||
//wifi初始化
|
||||
WiFi.mode(WIFI_AP);
|
||||
while (!WiFi.softAP(ssid, password)) {}; //启动AP
|
||||
Serial.println("AP启动成功");
|
||||
Serial.println("Ready");
|
||||
Serial.print("IP address: ");
|
||||
Serial.println(WiFi.softAPIP());
|
||||
byte mac[6];
|
||||
WiFi.macAddress(mac);
|
||||
WiFi.setHostname(ServerName);
|
||||
Serial.printf("macAddress 0x%02X:0x%02X:0x%02X:0x%02X:0x%02X:0x%02X\r\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
||||
|
||||
while (!udp.listen(localUdpPort)) //等待udp监听设置成功
|
||||
{
|
||||
}
|
||||
udp.onPacket(onPacketCallBack); //注册收到数据包事件
|
||||
|
||||
ArduinoOTA.setHostname(ServerName);
|
||||
//以下是启动OTA，可以通过WiFi刷新固件
|
||||
ArduinoOTA.onStart([]() {
|
||||
String type;
|
||||
if (ArduinoOTA.getCommand() == U_FLASH) {
|
||||
type = "sketch";
|
||||
} else { // U_SPIFFS
|
||||
type = "filesystem";
|
||||
}
|
||||
|
||||
// NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
|
||||
Serial.println("Start updating " + type);
|
||||
});
|
||||
ArduinoOTA.onEnd([]() {
|
||||
Serial.println("\nEnd");
|
||||
});
|
||||
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
|
||||
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
|
||||
});
|
||||
ArduinoOTA.onError([](ota_error_t error) {
|
||||
Serial.printf("Error[%u]: ", error);
|
||||
if (error == OTA_AUTH_ERROR) {
|
||||
Serial.println("Auth Failed");
|
||||
} else if (error == OTA_BEGIN_ERROR) {
|
||||
Serial.println("Begin Failed");
|
||||
} else if (error == OTA_CONNECT_ERROR) {
|
||||
Serial.println("Connect Failed");
|
||||
} else if (error == OTA_RECEIVE_ERROR) {
|
||||
Serial.println("Receive Failed");
|
||||
} else if (error == OTA_END_ERROR) {
|
||||
Serial.println("End Failed");
|
||||
}
|
||||
});
|
||||
ArduinoOTA.begin();
|
||||
}
|
||||
|
||||
void onPacketCallBack(AsyncUDPPacket packet)
|
||||
{
|
||||
char* da;
|
||||
|
|
@ -274,7 +330,7 @@ void setup() {
|
|||
Serial.println("Failed to initialise EEPROM");
|
||||
Serial.println("Restarting...");
|
||||
delay(1000);
|
||||
ESP.restart();
|
||||
esp_restart();
|
||||
}
|
||||
// eeprom 读取
|
||||
int k, j;
|
||||
|
|
@ -351,62 +407,17 @@ void setup() {
|
|||
FastLED.show();
|
||||
delay(15);
|
||||
}
|
||||
delay(500);
|
||||
delay(300);
|
||||
}
|
||||
|
||||
sprintf(mac_tmp, "%02X\r\n", (uint32_t)(ESP.getEfuseMac() >> (24) ));
|
||||
sprintf(mac_tmp, "ESP32-%c%c%c%c%c%c", mac_tmp[4], mac_tmp[5], mac_tmp[2], mac_tmp[3], mac_tmp[0], mac_tmp[1] );
|
||||
//wifi初始化
|
||||
WiFi.mode(WIFI_AP);
|
||||
while (!WiFi.softAP(ssid, password)) {}; //启动AP
|
||||
Serial.println("AP启动成功");
|
||||
Serial.println("Ready");
|
||||
Serial.print("IP address: ");
|
||||
Serial.println(WiFi.softAPIP());
|
||||
byte mac[6];
|
||||
WiFi.macAddress(mac);
|
||||
WiFi.setHostname(ServerName);
|
||||
Serial.printf("macAddress 0x%02X:0x%02X:0x%02X:0x%02X:0x%02X:0x%02X\r\n", mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]);
|
||||
|
||||
while (!udp.listen(localUdpPort)) //等待udp监听设置成功
|
||||
{
|
||||
if ( touch_STATE[3] ) {
|
||||
AutoWifiConfig();
|
||||
StartWebServer();
|
||||
}
|
||||
udp.onPacket(onPacketCallBack); //注册收到数据包事件
|
||||
|
||||
ArduinoOTA.setHostname(ServerName);
|
||||
//以下是启动OTA，可以通过WiFi刷新固件
|
||||
ArduinoOTA.onStart([]() {
|
||||
String type;
|
||||
if (ArduinoOTA.getCommand() == U_FLASH) {
|
||||
type = "sketch";
|
||||
} else { // U_SPIFFS
|
||||
type = "filesystem";
|
||||
}
|
||||
|
||||
// NOTE: if updating SPIFFS this would be the place to unmount SPIFFS using SPIFFS.end()
|
||||
Serial.println("Start updating " + type);
|
||||
});
|
||||
ArduinoOTA.onEnd([]() {
|
||||
Serial.println("\nEnd");
|
||||
});
|
||||
ArduinoOTA.onProgress([](unsigned int progress, unsigned int total) {
|
||||
Serial.printf("Progress: %u%%\r", (progress / (total / 100)));
|
||||
});
|
||||
ArduinoOTA.onError([](ota_error_t error) {
|
||||
Serial.printf("Error[%u]: ", error);
|
||||
if (error == OTA_AUTH_ERROR) {
|
||||
Serial.println("Auth Failed");
|
||||
} else if (error == OTA_BEGIN_ERROR) {
|
||||
Serial.println("Begin Failed");
|
||||
} else if (error == OTA_CONNECT_ERROR) {
|
||||
Serial.println("Connect Failed");
|
||||
} else if (error == OTA_RECEIVE_ERROR) {
|
||||
Serial.println("Receive Failed");
|
||||
} else if (error == OTA_END_ERROR) {
|
||||
Serial.println("End Failed");
|
||||
}
|
||||
});
|
||||
ArduinoOTA.begin();
|
||||
|
||||
// kalman mpu6050 init
|
||||
Wire.begin(19, 18, 400000); // Set I2C frequency to 400kHz
|
||||
|
|
@ -460,16 +471,16 @@ void setup() {
|
|||
motor.PID_velocity.I = v_i_1;
|
||||
|
||||
//最大电机限制电压
|
||||
motor.voltage_limit = 6;
|
||||
motor.voltage_limit = 12; // [V]s
|
||||
|
||||
//速度低通滤波时间常数
|
||||
motor.LPF_velocity.Tf = 0.01f;
|
||||
motor.LPF_velocity.Tf = 0.02;
|
||||
|
||||
// angle P controller
|
||||
motor.P_angle.P = 20;
|
||||
|
||||
//设置最大速度限制
|
||||
motor.velocity_limit = 40;
|
||||
motor.velocity_limit = 180; // [rad/s]
|
||||
|
||||
motor.useMonitoring(Serial);
|
||||
|
||||
|
|
@ -493,7 +504,6 @@ void setup() {
|
|||
Serial.println("SPIFFS Failed to Start.");
|
||||
}
|
||||
|
||||
StartWebServer();
|
||||
|
||||
Serial.print("System is ready \t Free Heap: ");
|
||||
Serial.println(ESP.getFreeHeap());
|
||||
|
|
@ -508,7 +518,11 @@ long loop_count = 0;
|
|||
double last_pitch;
|
||||
void loop() {
|
||||
Debug_Log_func("loop");
|
||||
ArduinoOTA.handle();
|
||||
if ( touch_STATE[3] ) {
|
||||
ESP32Server.handleClient();
|
||||
//delay(1);//allow the cpu to switch to other tasks
|
||||
ArduinoOTA.handle();
|
||||
}
|
||||
motor.loopFOC();
|
||||
|
||||
while (i2cRead(0x3B, i2cData, 14));
|
||||
|
|
@ -547,8 +561,8 @@ void loop() {
|
|||
if (abs(pendulum_angle) < swing_up_angle) // if angle small enough stabilize 0.5~30°,1.5~90°
|
||||
{
|
||||
target_velocity = controllerLQR(pendulum_angle, gyroZrate, motor.shaftVelocity());
|
||||
if (abs(target_velocity) > 140)
|
||||
target_velocity = _sign(target_velocity) * 140;
|
||||
if (abs(target_velocity) > motor.velocity_limit)
|
||||
target_velocity = _sign(target_velocity) * motor.velocity_limit;
|
||||
|
||||
motor.controller = MotionControlType::velocity;
|
||||
motor.move(target_velocity);
|
||||
|
|
@ -629,6 +643,13 @@ void loop() {
|
|||
touch_touched[2] = false;
|
||||
}
|
||||
|
||||
if (touch_touched[3]) {
|
||||
//Serial.print("\nLight2 touched ");
|
||||
//Serial.println(touch_touched_times[2]);
|
||||
|
||||
touch_touched[3] = false;
|
||||
}
|
||||
|
||||
//灯光及按键处理
|
||||
if ( touch_STATE[1] ) {
|
||||
pride();
|
||||
|
|
@ -696,7 +717,7 @@ float controllerLQR(float p_angle, float p_vel, float m_vel)
|
|||
// - k = [13.3, 21, 0.3]
|
||||
// - x = [pendulum angle, pendulum velocity, motor velocity]'
|
||||
|
||||
if (abs(p_angle) > 3) //摆角大于2.5则进入非稳态，记录非稳态时间
|
||||
if (abs(p_angle) > 2.5) //摆角大于2.5则进入非稳态，记录非稳态时间
|
||||
{
|
||||
last_unstable_time = millis();
|
||||
if (stable) //如果是稳态进入非稳态则调整为目标角度
|
||||
|
|
@ -706,7 +727,7 @@ float controllerLQR(float p_angle, float p_vel, float m_vel)
|
|||
stable = 0;
|
||||
}
|
||||
}
|
||||
if ((millis() - last_unstable_time) > 500 && !stable) //非稳态进入稳态超过500ms检测，更新目标角为目标角+摆角，假设进入稳态
|
||||
if ((millis() - last_unstable_time) > 1000 && !stable) //非稳态进入稳态超过500ms检测，更新目标角为目标角+摆角，假设进入稳态
|
||||
{
|
||||
//target_angle -= _sign(target_velocity) * 0.4;
|
||||
target_angle = target_angle+p_angle;
|
||||
|
|
@ -754,8 +775,6 @@ unsigned long LastMillis = 0;
|
|||
void TenthSecondsSinceStartTask() //100ms
|
||||
{
|
||||
unsigned long CurrentMillis = millis();
|
||||
ESP32Server.handleClient();
|
||||
delay(1);//allow the cpu to switch to other tasks
|
||||
if (abs(int(CurrentMillis - LastMillis)) > 100)
|
||||
{
|
||||
LastMillis = CurrentMillis;
|
||||
|
|
@ -793,8 +812,8 @@ void OnSecond()
|
|||
//Serial.println(DateTimeStr);
|
||||
|
||||
#if defined(BAT_VOLTAGE_SENSE_PIN) //电池电压检测
|
||||
//driver.voltage_power_supply = return_voltage_value(BAT_VOLTAGE_SENSE_PIN);
|
||||
bat_voltage = return_voltage_value(BAT_VOLTAGE_SENSE_PIN);
|
||||
//driver.voltage_power_supply = bat_voltage;
|
||||
//Serial.println(driver.voltage_power_supply);
|
||||
if (bat_voltage < min_voltage && !battery_low)
|
||||
{
|
||||
|
|
@ -821,27 +840,41 @@ void OnSecond()
|
|||
//battery_low = 0;
|
||||
} else { //电池电压低闪灯
|
||||
if (millis() % 500 < 250)
|
||||
digitalWrite(ACTIVE_PIN, 1);
|
||||
else
|
||||
digitalWrite(ACTIVE_PIN, 0);
|
||||
else
|
||||
digitalWrite(ACTIVE_PIN, 1);
|
||||
}
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
for (byte i = 0; i < 3; i++) {
|
||||
for (byte i = 0; i < 4; i++) {
|
||||
if (touchDetected[i] > 0) { //检测到触摸中，一秒计数一次，未触摸则清零
|
||||
touch_touching_time[i]++;
|
||||
//长按事件处理
|
||||
if (touch_touching_time[1] % 2 == 0) { //按住大于2秒关灯或者开灯
|
||||
if (touch_touching_time[i] % 2 == 0) { //按住大于2秒
|
||||
switch (i) {
|
||||
case 0:
|
||||
|
||||
break;
|
||||
case 1:
|
||||
touch_STATE[i] = !touch_STATE[i]; //灯光状态反处理
|
||||
Serial.println("LIGHTS_ON/OFF");
|
||||
break;
|
||||
case 2:
|
||||
case 3:
|
||||
digitalWrite(ACTIVE_PIN, 1);
|
||||
delay(500);
|
||||
if(touch_STATE[i]==1){
|
||||
ESP32Server.close();//关闭网络服务
|
||||
WiFi.disconnect();
|
||||
WiFi.mode(WIFI_OFF);
|
||||
Serial.println("WIFI_OFF");
|
||||
}else{
|
||||
AutoWifiConfig();
|
||||
StartWebServer();
|
||||
Serial.println("WIFI_ON");
|
||||
}
|
||||
touch_STATE[i] = !touch_STATE[i]; //状态反处理
|
||||
|
||||
break;
|
||||
}
|
||||
|
|
@ -864,6 +897,7 @@ void OnTenthSecond() // 100ms 十分之一秒
|
|||
//Serial.println(rgb_brightness);
|
||||
FastLED.setBrightness(rgb_brightness);
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
if (TenthSecondsSinceStart % 10 == 0) //10次为1秒
|
||||
|
|
@ -902,8 +936,6 @@ String ProcessUpdate() //页面更新
|
|||
ReturnString += ",";
|
||||
ReturnString += test_flag;
|
||||
ReturnString += ",";
|
||||
ReturnString += bat_voltage;
|
||||
ReturnString += ",";
|
||||
ReturnString += EEPROM.readFloat(0);
|
||||
ReturnString += ",";
|
||||
ReturnString += swing_up_voltage;
|
||||
|
|
@ -917,6 +949,8 @@ String ProcessUpdate() //页面更新
|
|||
ReturnString += v_i_2;
|
||||
ReturnString += ",";
|
||||
ReturnString += v_p_2;
|
||||
ReturnString += ",";
|
||||
ReturnString += bat_voltage;
|
||||
|
||||
if (log_control) {
|
||||
ReturnString += ",";
|
||||
|
|
@ -936,7 +970,7 @@ String ProcessUpdate() //页面更新
|
|||
ReturnString += ",";
|
||||
ReturnString += gyroZangle;
|
||||
} else {
|
||||
ReturnString += ",,,,,,,,";
|
||||
ReturnString += "0,0,0,0,0,0,0,0,0";
|
||||
}
|
||||
|
||||
ReturnString += ",";
|
||||
|
|
@ -1237,6 +1271,7 @@ double return_voltage_value(int pin_no)
|
|||
double tmp;
|
||||
double ADCVoltage;
|
||||
double inputVoltage;
|
||||
analogSetPinAttenuation(pin_no, ADC_6db);
|
||||
|
||||
for (int i = 0; i < 20; i++)
|
||||
{
|
||||
|
|
@ -1248,6 +1283,17 @@ double return_voltage_value(int pin_no)
|
|||
inputVoltage = tmp / 20;
|
||||
if(inputVoltage!=0)
|
||||
inputVoltage = inputVoltage + 0.001;
|
||||
/*
|
||||
|
||||
for (int i = 0; i < 20; i++)
|
||||
{
|
||||
tmp = tmp + analogRead(pin_no);
|
||||
}
|
||||
tmp = tmp / 20;
|
||||
|
||||
ADCVoltage = ((tmp * 3.3) / 4095.0) + 0.165;
|
||||
inputVoltage = ADCVoltage / (R2_VOLTAGE / (R1_VOLTAGE + R2_VOLTAGE)); // formula for calculating voltage in i.e. GND
|
||||
*/
|
||||
|
||||
return inputVoltage;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue